Close



Results 1 to 3 of 3
  1. #1

    Preheating printer?

    There are some preheating configurations on the controller, but I'm not seeing any way to utilize them. It would be nice to use a preheat feature as I come close to starting a print, particularly with ABS. Is this possible?

  2. #2
    Hi Tinker,

    There are some menu items we disabled, including some prepare > preheat PLA and preheat ABS options. Are these the ones you mean? They caused some confusion on how to start a print among our early customers, and since the .fff profiles automatically set the temperatures in the print gcode, they're somewhat redundant. Couple of options if you want to pre-heat the printer before beginning the print:
    1. Use the Control > Temperature menu to manually set the bed and print head temperatures
    2. Send us an email at support@fusion3design.com and we can help re-enable the preheat options


    Hope this helps!
    Chris

  3. #3
    Your issues related to the heating or preheating of the printer can be resolved here. Just tell your problem here and try to find the best solution from the experts and professionals. You can check best paper writing services and get skill to complete your education task easily. They are working days and nights to solve these technical issues related to the update and the systems.
    Last edited by RonaldD; 12-22-2020 at 04:38 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •