Subscribe to Our Newsletter Advertise
Close



Results 1 to 3 of 3
  1. 05-04-2015, 09:42 PM #1
    jess9999
    jess9999 is offline
    Student
    Join Date
    May 2015
    Posts
    1

    Talking Prusa i3 building

    hey i yust bought a prusa i3 from 3dprintersonlinestore it comed well pakaged and was made of very nice acrylic parts i built up the mechanical part in 5 hours then wired yaaay now im in the part of calibration but ... what software do you recomend for calibrating?
    Reply With Quote Reply With Quote
  2. 05-07-2015, 03:52 PM #2
    3dkarma
    3dkarma is offline
    Engineer
    Join Date
    Jan 2014
    Posts
    462
    There's a good description of the calibration process over at the reprap wiki:

    http://reprap.org/wiki/Calibration

    The calibration process doesn't require any software above and beyond what you normally use for 3D printing.
    Reply With Quote Reply With Quote
  3. 05-07-2015, 04:21 PM #3
    raysspl
    raysspl is offline
    Technologist
    Join Date
    Mar 2015
    Location
    eezitec.com
    Posts
    130
    Follow raysspl On Twitter Add raysspl on Facebook
    Welcome! The Prusa i3 is an amazing 3dp & will serve you well
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules