Close



Results 1 to 3 of 3
  1. #1

    Lightbulb Simply Rotating my object on the print bed helped with adhesion

    I was experimenting to solve a problem. Part of an object kept rising off the bed and making the final print rough and misshaped... I rotated it 90 degrees and that fixed it. What I think now, after lots of suggestions from other forums, is that the fan is more effective from certain angles at cooling the different parts of the object based on position - and in the new position, the vulnerable section was better cooled.
    I have a video and lots of images on this blog post: http://goo.gl/C7WDNF

  2. #2
    Engineer-in-Training
    Join Date
    Apr 2015
    Location
    Northern Ohio
    Posts
    198
    The build direction of goes along ways to the end product. I have had some prints that I have printed in some non-intuative positions that turnout great.

  3. #3
    Engineer
    Join Date
    Aug 2014
    Location
    Montreal, Quebec
    Posts
    576
    You could put a brim and the fan problem would never happens to begin with.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •