Close



Results 1 to 2 of 2
  1. #1
    Student
    Join Date
    Jan 2014
    Location
    Nevada
    Posts
    46

    Da Vinci 1 hot end and extruder replacement

    I designed a new carriage to replace the Da Vinci 1 hot end and extruder. I used a Hexagon hot end and MK8 extruder. It works great. My Da Vinci printer has been converted to a Ramps/Arduino controller. I do not know if this will work on a Da Vinci that has not been converted to a different controller.
    It uses linear bearings and there is a 15mm and a 16mm bearing version on the thingiverse files.
    Here are the thingiverse files:
    http://www.thingiverse.com/thing:665620

    Attached Images Attached Images

  2. #2
    How easy is it to convert the Da Vinchi to RAMPS? I've been wanting to do it but it seems hard. Is there a specific guide that you used?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •