Search:

It can be improved in the slicer settings. It's where one layer ends and the next layer starts

Set seam to an external corner in your slicer.

If that Benchy file came ready sliced, you'll need...

Perhaps you'd care to explain what you mean?

I found that by using some locknuts/wingnuts under the bed adjuster nuts it helped to eliminate any drift to the bed height caused by vibrations or the bed moving backwards and forwards.

Also...

These are just guesses.

Did you change the start and finish G-code when you changed the bed size?
Did you reset the new bed size in Cura?

Is there any way you can revert to the original...

Can only suggest that you try a bed leveling test somewhere along the lines of..
https://www.printables.com/model/171544-bed-leveling

I use something similar only with 13 squares. I don't know...

If that's a Raise Pro 2 you might find an answer on the Raise Forum.
https://forum.raise3d.com/viewforum.php?f=1&sid=2b098833d7fce6079094aa1f003eb987

What overhang? I don't see any overhang.

See if there is anything in the slicer software that lets you split or cut an stl file.

Prusa slicer shown which seems to be an excellent slicer

When the wheel turns back it is usually retracting the filament as per the slicer retraction settings.
It is perfectly normal.

Sometimes a new just joined member posts a first post and then finds that they are banned in less than 60 seconds from posting.

I monitor this forum several times a day usually and spammers are using new tricks to put and hide live web links in posts, presumably for Search Engine Optimisation purposes.
Latest two tricks...

A dry box with two rollers for the reel to sit on will probably have less friction than the central hanger.
The one I have came with a Qidi printer and the reel rests on two steel rods that are...

From memory.......there are fonts in Fusion 360 which you can extrude and export as an STL file.
Possibly something similar in other 3D drawing programs.

Just extrude a square base and extrude or...

If you don't get a reply on here you could try the Raise 3D forum
https://forum.raise3d.com/viewforum.php?f=1&sid=2b098833d7fce6079094aa1f003eb987

There's usually a user adjustable slicer setting to set number of walls.

Looks very much like a slicer setting, I had a very similar issue.

I started using Prusaslicer and set the top fill pattern to Monotonic and the issue more or less disappeared.
The reason for the...

Very strange that you live in Canada and your IP address is in Pakistan....182.188.217.26




EVO South



Usage Type

This appears to be a kickstarter project because it is not yet available to buy

I can't help with the support issue, however the line of filament is a purge line to make sure filament is flowing.

It is set with the start and end G-Code in the printer settings.
You can cut...

First time posters that post a live web link will be banned.

Editing posts later to include a web link will get you a ban, as will posting hidden links.

Posts made to specifically promote...

There has been a similar post with the same web survey from a poster with an IP address in Macedonia.
That post has been removed.

According to your website the printer is not available yet and appears to be still under development, there are no specifications as to print volume.

This is the third time that this post has had to be moved to this 'Free Self Promotion' category.
The next time it happens your post will be deleted and you will be banned.

You don't give any...

I'm using Firefox, been using it for more than twenty years and never had that happen before.

To me it looks like the bed is low at the rear, this is just my opinion and I am not an expert.

First, perhaps try increasing the 'Z' offset in the slicer settings by small increments, eg.0.02mm...