Search:

"AluhotendV5C"



https://dl.dropboxusercontent.com/u/76417200/hotend-normaladsml.jpg


The AluhotendV5C-1.75mm/3mm is designed for general use high resolution printing with PLA , ABS and...

this is a test i have done recently to simulate the worst case scenario where a thermal runaway (mosfet failure) couple start a fire

timelapse version:
...

it's highly dependant on what you are printing and with how high the infil percentage is , we normally go through around 10 kg per week, but thats slowing down a little

i struggle with 0.1mm as it is

while the main difference between the two is one can be freely re produced and the other cannot , there are a lot of other issues,

a classic example with closed source is with the up! 3d printer,...

not to mention crazy print times

garyhlucas: 0.1mm (100 micron) is very possible, currently i print pretty much everything at 0.1mm to 0.2mm layer heights with a 0.3mm nozzle with a hotend built for the purpose

x y...

you generally get what you pay for where filament is concerned, it's also very dependant on your printer, extruder and hotend, i wouldn't even bother trying to run this stuff on an up! or a stock...