Search:

I was probably tired when I made the post, I edited it. thank you.

I will try the hairspray, So should I scale it 1.5% then? Also what is your recommended ambient temp? I was actually able to...

ive been printing with PLA for several months now and wanted to try my hand at ABS and so far no such luck. Ive only tried the one item and tried it 3 ways, no brim - bad. Brim at 7mm was meh, then a...

I set it tighter because I had a problem with prints not sticking very well, I first tried turning up the bed temp to 70c and that didnt help particularity in one corner for some reason and making it...

Still new to printing and sometimes I see these "Errors" in the print that I dont know what to call them but my question is what causes them?

I just found out that my top layer didnt print because I bought cheap PLA. [3D Solutech] My price on Amazon was $15 to my door for 1kg. Heres what ive now learned. 80% of the spool was fine but the...

My exact dimensions are 250x216.5x100mm I already tried moving the object below the bed and when on the printer the extruder started moving around as if it was printing from start but without...

Just the very top layer is missing and within my software parameters its set as 1.2mm so im guessing thats all thats missing. I use the software that came with my printer which is JGcreate. I took...

Link to the gcode below, I couldnt attach it because the file was to large. So I understand It will be easier to print just the top layer then glue it and sand the edge smooth. I can manage that. I...

New to 3D printing and I wanted to print a giant nut, specifically the battlebots nut so that I could copy it in silicone and remold it multiple times in pourable plastic (that's more my domain) what...