Search:

Print a level test with something like thirteen 0.2mm thick X 30mm squares set in a grid pattern to cover the bed, see printables or thangs for a suitable STL
Look at the result to determine the low...

Have you sliced it in 'vase' mode. That will literally only make a thin walled vase.

I'm sure I've seen a printer on Youtube printing upside down, i.e. filament extruded upwards.

Any poster using ChatGPT to make posts will be banned.

If you need to use AI to post in this forum you are in the wrong place.

Thread now locked to stop spamming posts.

Just lately there have been some posts that appear to answer a previous post, but the general layout seemed a little odd, frequently a long answer that is like an essay.

I couldn't quite put my...

Sounds like your start and end G-Code could have been altered in your slicer settings.

Contact the manufacturer and explain the problem and see if they will send you new slicer profile/settings.

A suggestion would be to check out YouTube for videos about bed leveling and nozzle 'Z' height.
Search for Teaching Tech he has some good videos.

https://www.youtube.com/c/TeachingTech

To me...

Shouldn't be a problem apart from having to scroll through them to find the one you want if each file is just a line of text.
I save mine on a PC and transfer to an SD card as needed then delete...

The rats nest is frequently caused by the print coming loose.

Can only suggest to thoroughly clean the bed with some IPA before each print.
Also a bed level check using one of the many...

Might be better to look at reviews on Youtube than in an 'Off Topic' category

Perhaps you could ask the technician at your library where you intend to have the print done.
You could always send your file to one of the many companies that specialise in printing 3D files.
...

Maybe look on Youtube, there are countless videos about bed leveling available.

I have never had a Creality printer, but I would have thought there would be something in the assembly instructions...

Lines could be extruded filament stuck to bed, will probably need to be scrapped off.
If that's a glass bed there is a danger that some glass will come away with any stuck filament, try warming it...

Not sure from the photo what faint lines you mean.

Suggest you use one of the many downloadable bed levelling tests and check the overal bed for high or low spots. Once you have it level try...

Glad you got it sorted.

My printer was from an early production run and as far as I know on mine there is no way to heat the chamber other than by the bed warming.
I run my bed at 95 and my...

Sorry, when you said axle I thought you meant something like a tube or rod.

I know next to nothing about resin printers, but could you turn the STL in the slicer through 90 degrees so the holes...

A sketch or picture of what you are trying to achieve would help.

One way might be to split the axle in half down itrs length a glue the two halves together afterwards and then clean the outside...

The image where the shrinking appears near the bottom looks very similar to a problem I had with a tube shaped print, never did get an answer from Qidi as to the cause.
I just put it down to yet...

The link doesn't work and I cannot see any photos.
Which extruder are you using ?

I have the Qidi X CF-pro and I gave up with the standard extruder and just used the High temp one. I only use ASA...

https://3dprintboard.com/showthread.php?57498-New-3D-print-user-needs-help

Link appears to be broken

I think your slicer will have a setting that enables you to split an STL into seperate parts.

Some pillowing visible, maybe try for three or four top layers instead of two ?

Looks to me like your nozzle/bed gap is slightly too big. This can be adjusted in your slicer settings with 'Z' offset adjustment.

Quite possible your bed level needs adjusting.

Lots of bed...

It can be improved in the slicer settings. It's where one layer ends and the next layer starts

Set seam to an external corner in your slicer.

If that Benchy file came ready sliced, you'll need...

Perhaps you'd care to explain what you mean?