Search:

They're hoping to fix this in the coming months I'm told.

Your pic is not showing, to post a pic, just go to edit your post and click on manage attachments, you can load pics straight from your PC, tablet or whatever device you use, no need to involve. an...

I have no experience with TPU, however it is known for the prblems you describe. Please remember that anyone who replies does so entirely voluntarily and is only trying to help..... quote....."your...

Had an email to say it should all be fixed now

Had an email to say the devs will be working on it first thing Monday morning.

I've passed screenshots of your post on to admin.

Free.........One Qidi X-CF pro printer, modified filament feed route and modified all metal hot end to accept standard nozzles and three pei build plates. also several spare nozzles . Was working...

After buying two lots of eSun vacuum storage bags and finding several bags failing to hold the vacuum which renders them useless I have now started to use a vacuum food sealer. The one I bought...

Have you cleaned the extruder teeth of any filament bit embedded in the teeth?

When first blocked try a cold pull, nozzle cleaning needles are also readily available on Amazon for using on a hot nozzle, often in a package with several spare nozzles. ...

Could be that only Qidi tech can solve this, however perhaps try a print using Prusa or Orca slicer to see if the result is the same. How old is the printer? If still in warranty and problem not...

Yes, but you need to use all the bed leveling screws initialy to get in the ball park using your piece of paper or shim under the nozzle.

Sounds like your bed is lower on one side.

I see what you mean. I have never seen the advanced features and am totally unaware there being any.

I've been using Firefox for over twenty years and wonder if I'm missing something? Not sure what these advanced editing features are?

The STL file measurement is in metres, so scaling it down to fit in a Bambu printer will probably not work because some parts are too thin to replicate.

Could be you had a clogged nozzle and the crumbs you see are from the filament grinding, Check for clogged extruder gear and try a new nozzle.

From your description.... If the hot end has a teflon tube insert that butts up to the top of the nozzle it's likely that the end of it is not cut straight across and does not seat properly up to...

From the pic it looks like two sides slope outwards, if this is the case and the measurements at the top exceed the build volume, then the print will not work.

I'm interested to know why it would be a better choice? A better choice than what, and how or why it would be a better choice?

It could be your nozzle is set too high when the print starts. Try adjusting the 'Z' offset in the SLICER SETTINGS to make the nozzle closer to the bed, try it in 0.02mm increments and print a...

This might help..... https://3dprintbeginner.com/bambu-studio-fine-tuning-tips-and-tricks/

You could do a cold pull to clear any residual filament from your nozzle, see youtube for a demo of this. You can get lengths of specific nylon filament that are meant for doing a cold pull,...

Recommending a printer is a question that gets asked a lot and posters will reply with different opinions frequently based on youtube reviews. Suggest you ask for recommendations from owners and...

Possibly under extrusion. If you try Orca slicer there are several calibration tests built into it.