Search:

The filament I am using is varied, but the one I got a successful print from is Polymaker PETG in transparent red. https://amzn.to/3WSt802 Pretty sure the issue is the build plate itself. Out of the...

Okay so I think I've got a bead on it...

Wash and dry the PEI thoroughly, then get after it with ispropyl alcohol for a thorough wipe down to remove any remaining soap residue.
Apply purple glue...

My experience is only with low end equipment here, but I am going to give you my input here...I have the Voxelab Aquila, basically the same thing as the Creality Ender 3 V2 with some minor...

Came back to a bad print. Did more digging, someone on a different forum suggested washing the PEI with soap and water, thoroughly drying and wiping down with alcohol wipes between PLA and PETG which...

Just a real quick update here we have successfully made it through the first layer which is where it usually fails so I'm going to let it print for a while can I grab some lunch at my favorite place...

I am trying 2 things right now which is raise the hotend temp up a bit, currently at 235, and bumping the z offset down by .01mm until I see the lines stuck together.Normal Z offset on this printer...

Good questions and something I have never heard of. Give me a second to respond...When printing starts it lays down a nice even line, makes a turn, makes a nice even line, so basically outlining the...

I have tried with both printers. On the Aquila I just follow the regular leveling process, I.E. set the bed height so at each corner I can just start getting some dragging resistance on a piece of...

Okay I am going to come right out and admit it. I am clueless when it comes to PETG. Never printed with it before, and, well not only does it not stick to the build plate, it wants to run away from...

So I have a printer that is not supported by Cura, but I got spoiled with it on my first printer, and would like to use the same software between the 2.Printer #1 being a Voxelab Aquila and I simply...

From what I have seen, read, heard, and experienced, all 3D printers are fussy and fidgety to get going, some have features such as auto level that minimize that fussiness. How much money do you want...

So when I bought my printer from Voxelab payment was processed by, and the printer was shipped from Flashforge.

So that begs the question for this forum. I have some questions about my newest...

Good day, I just signed up, most forums I am on have a dedicated forum with a sticky thread for new member introductions, since that isn't here, I am just going to introduce myself and give an...