you can use a spacer like this:https://www.thingiverse.com/thing:1886458 it will offset the thickness by triggering the Z axis limit switch early. The models include 2 to 6 mm spacers, or you can...
Type: Posts; User: Nozzle
you can use a spacer like this:https://www.thingiverse.com/thing:1886458 it will offset the thickness by triggering the Z axis limit switch early. The models include 2 to 6 mm spacers, or you can...
Assuming you are using Win10 and trying to print by WiFi:
You first need to go to the Win10 Network settings. Finder should show up as a network, and you'll need to connect to it.
Once...
Also, you can go to File/Preferences and set the preferred extruder to Left so it will always default to the Left extruder.
This guy does it with Extrusion Width:https://www.youtube.com/watch?v=9YaJ0wSKKHAThough this somewhat will impact dimensional sizes too.
Sorry, I'm still learning Flash Print myself, so no expert advice from me.
What about under the Infill Tab, Combine Infill, the Maximum Solid Combine setting description includes "infill will be...
I believe that setting is under the Infill tab, you can increase the Strength Infill, Solid Layers setting.
I'm fairly new to 3D printing, and my printer is a Flash Forge Dreamer.I've watched all the videos about unloading filament, and read all the posts about it, but it just seems like a source of...
Since it was messed with before you worked on it, one thing you can try is heating up the extruder and checking to see if the nozzle can be tightened up anymore. There could be material in the nozzle...