Search:

I use Aqua Net extra super hold hair spray. I spray in on to a paper towel or a lent free cloth and wipe it on the glass.

I will try to post a picture wen I get home from work. I will say I have tried it a few ways. I have tried it 2 ways. The first time I cut the sheet to to fit the whole bed and the heat transfered ...

I ordered some 400mm x 205mm x 0.5mm Silicone Thermal Pad for CPU GPU Heatsink off of amazon and it works great. I just cut it into strips and it holds the glass in place.

Here is the link.
...

Glad to help. :D

While the print is printing you can go into the display menu on the printer and find the setting "pause at zpos". All you need then is how many mm print before the pause. When it gets to that point...

How many shells are you using? I always use at least 2 sometimes 3.

I have tried to use this but it never lets me upload. I always get an error mgs saying that there is a problem with the server to try again later. So after about the 20th time trying I gave up and...

OK I may try that. I know that I had read a post from someone that had replaced the DaVinci 1.0 board with RAMPS had to replace the end stops with switches because the optical ones that are there...

I was going to use the mightyboard because I have it at the house already.

The end stops on the DaVinci 1.0 are optical and I am not sure the would work on the mightyboard. I know that guys that have put ramps boards on it have had to replace them with switches. As for the ...

I will look into Marlin. The only reason I was going with Sailfish is it is what I am use to on my Flashforge Creator Pro.
Will the Marlin FW work on the Mighty Board

I got my DaVinci 1.0 way back in August of 2014 and used it almost non stop till February of 2015 when I go my Flashforge Creator Pro. Since then I don't use the DaVinci as much. I was thinking about...

As curious aardvark said that is to fast. I just gave my 35% as an example. I never use a raft to print anything. For a model like that I would slow it down to 10% for the first layer.

Under the layer tab what is the 1st layer speed set for? I set mine for 35%.

I was having the same thing happen to me but it was around the middle of my bed. It was the X axis wire on the stepper motor. The wire looks fine but is broken some where. I replaced it and it is...

I have to agree with this 1000% :)

There is a nut under the bed between the wingnut and the bed that has come loose. To fix it you will need to take all the wing nuts off and remove the heatbed from the gantry so you can get to the...

I also have a Flashforge Creator Pro(got it in Feb. 2014). Here is what I have added to mine.
1.) Simplify3d atleast for me is well worth the money.
2.) installed a glass bed.
3.) Micro Swiss MK10...

Have you tried setting the 1st layer height between 80 and 90% in S3D?

Glass with glue stick.

I find that setting my 1st layer height between 80 and 90% in S3D makes the part stick. As for the resistance I use some printer paper and adjust to the point I can feel the nozzel hitting the paper...

Let me just say I ordered one these and got in installed Last Thursday night(Dec 17,2015). This is an A++++++ product. Makes it very easy to adjust the nozzels. Well worth the money. ;)

Mine came with the thermal paste. I don't remember the brand.

I just installed this last week and so far it is printing great. I am running my first print using some Hatchbox Black PETG at 245c.

I got some from this company. They also have the tube precut.

http://www.p3-d.com/low-friction-extruder-nozzles.html