Search:

OK then maybe your nozzle is not at the correct print level.

My 3D Printers are nothing much I found that in a enclosure I can 3D Print ABS at 232C with a bed temp of 96C

Attached is my basic...

You are most welcome, this is how I stay informed and keep my own 3D Printers working.
Helping others keeps me up to date with all 3D Printer knowledge needed to be able to keep my own 3D Printers...

I am having problems sense purchasing this newer what is called a smooth spring steel print bed.
Until I gouged it with the nozzle and covered if with a 2nd attachment PEI self adhesive bed surface....

Is the layer shift on the X or Y or on both axis's

Have you watched the print, does the nozzle seen to run away then return and continue like nothing happens at times

Has it ever made a louder...

In the image below is this the shifting you are seeing

https://3dprintboard.com/attachment.php?attachmentid=19882&stc=1&d=1732980254...

https://3dprintboard.com/attachment.php?attachmentid=19875&stc=1&d=1732665026

Download Marlin 2.1.2.5 " Download and Configurations files.
Unzip both files in same directory
Find...

While the core functionality remains similar, some minor tweaks might be necessary depending
on the specific Ender 3 model (like Ender 3 Pro, Ender 3 V2) due to slight hardware differences.

I appears found most of the information Just need the exact name of the Ender 3 Printer Ender 3, Ender 3 Max, Ender 3 Pro, Ender 3 S1, S2 , V2, V2 Neo.
Also found another link which has a simpler...

Do not know the difference what controller did that one have was it the 4.2.2 or the 1.1.5 with BL Touch or end stop switch.

Do not see much difference mine controller has a ARM-level Cortex-M4 168 MHz STM32F407ZGT6 chip, your uses LPC1769 120MHZ chip. My Marlin 2.1.2.2 Firmware still complies without errors need to select...

This is the controller I just purchased it is a BigTreeTech Pro V1.1 with TMC 2209 drivers. I have already configured marlin though still designing and building my CoreXY, So have never flashed to...

I do not see a problem with helping you out here. I have updated my 3D Printers from Marlin-1.1.0-RC6_Hici3-1.1.0-RC6_CL061316a to Marlin-2.1.2 And have helped many others who have the same or...

I had this happen now a again normally if if I raise the nozzle a little the nozzle will print over this bump. What i see is high spot on the bed and raising the nozzle height the nozzle will print...

In marlin firmware this is done during coding. In Configuration_adv.h > search for "// @section advanced pause" There is a section for "Advanced Pause for Filament Change" In PrusaSlicer after...

I suggest the you check the solder connections for the Bed heater Mosfet , see it there is a cold solder connection on main board.

I am having a problem with the login 1.jpg screen. It will not let me login and shows my password and only after clearing the fields clicking login will the second login screen appear Login 2.jpg...

Do not believe my model size prints will fit in the freezer space left though.

Do have a question though I purchased some spring steel flexible magnetic PEO - PET bed sheets and am having...

Will Vinyl transfer paper Hold my Part


https://youtu.be/qzWKE3TO9UU

As you can see in this video the brim comes of very easily, though the model stuck very well, it still released the surface...

As a layer of surface protection you could print on paper tape.

I have 3D Printed using medium tack Vinyl Transfer Paper Tape 3D Print on a Raft to avoid paper sticking to bottom.
Myself have...

If using an STL file you will need to set correct temp at the designated spot. If not then I have been doing it wrong for a long 8 year time period. As STL files do not contain configurations for...

I created my first model knowing very little about Cad, I heard about Fusion 360 Free for Hobbyist downloaded and installed to software.
Knowing very little about the firmware of how to use it...

Currently I am trying to print on this surface with no luck.
IdeaFormer 256x268mm Anycubic Kobra 3 Compatible 3D Printer Build Plate, Spring Steel PEO / PET Heat bed Sheet with Magnet Base.

...

Not sure exactly what I am looking for.

Well I see a solid layer below a interweaving mesh topped with a 2nd solid top layer.

This design looks like it could be difficult to 3D Print at 11mm^3...

You are welcome.

I have had New filament just removed from packaging cause me similar problems.
Though tuning a 3D Printer can be quite frustrating until you learn the process.

I starting...

You are welcome.

I have my 3D printer setup to print the first layer at 32% then the remaining layers at 72-82%.

This is relative to which slicer I am using Cura 15.04.6 prints at what I ...