Close



Dig deeper, search our News website




Search:

Type: Posts; User: airscapes

Page 1 of 11 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    150

    with a 4mm nozzle I would be printing the part at...

    with a 4mm nozzle I would be printing the part at a .3mm height and and extrusion width of .4mm
    your first layer should be .3 just like every other layer when the staring height is correct.
    Your...
  2. Replies
    5
    Views
    150

    PETG need to have the starting height set...

    PETG need to have the starting height set correctly. What this means is for whatever layer height you are using, you must adjust the Z offset so the part comes out the correct height. When set...
  3. If the tight end is that which is against the...

    If the tight end is that which is against the bed, I would say your starting Z offset is too close to the bed causing the threads to be squished.
  4. Replies
    2
    Views
    175

    Seems a bit hot.. Make a test model of a single...

    Seems a bit hot.. Make a test model of a single tower of the same diameter as you finished part but a little taller, print it at 250 then try and break it (you are checking layer bonding here. Lower...
  5. Replies
    3
    Views
    331

    Welcome to 3D printing, there are may things that...

    Welcome to 3D printing, there are may things that need to correct for any of it to work well. Unfortunately those are not always correct out of the box.
    From what I understand Prusa has very good...
  6. Replies
    4
    Views
    840

    Is a table saw worth it? Is a set of golf clubs...

    Is a table saw worth it? Is a set of golf clubs worth it? Is an iphone worth it? Only you can answer the questions is a new hobby worth it to you? This is not like buying a desktop printer and...
  7. Looks like you starting height is changing...

    Looks like you starting height is changing between the front and back. Nozzle has no room for plastic to come out. So your bed is not level or the tape is not the same thickness. Yes, from the very...
  8. Replies
    1
    Views
    397

    I believe the difference in size is more so the...

    I believe the difference in size is more so the fact we are using plastic than the type of fabrication although FFF is going to be more problematic due to the ROUND extrusion of filament which is...
  9. Replies
    1
    Views
    269

    No, the more plastic and less adhesion points...

    No, the more plastic and less adhesion points make a stronger part. So for larger items bigger nozzles make stronger parts. I normally use a .3 layer with a .5 nozzle so visually the product still...
  10. having one of these handy works really well at...

    having one of these handy works really well at the final clean up after you get the gob off and in between print jobs to keep the nozzle clean....
  11. +1 for onshape, it will take time to learn it and...

    +1 for onshape, it will take time to learn it and figure it out but well worth the effort. I have not made any gears yet but if you can get a photo and provide the sizes I can give it a try as I...
  12. Replies
    1
    Views
    322

    That is not stringing, the extruder is crossing...

    That is not stringing, the extruder is crossing areas that are already printed and leaving marks. This is a normal artifact of FFF fabrication. I would consider that a normal surface for a top...
  13. Replies
    4
    Views
    901

    The plate on my Makergear move about .05mm at...

    The plate on my Makergear move about .05mm at 110C vs 70 for PLA I always print calibrations squares and adjust the z offset for different bed temperatures. The change takes about a hour with the...
  14. There are a number of things you need to deal...

    There are a number of things you need to deal with to get a good print with the correct size and height.
    1 Bed level (must be level within .02mm is what I shoot for)

    2 Starting height must be...
  15. Replies
    2
    Views
    304

    Well something is coming loose.. and either...

    Well something is coming loose.. and either moving the part (bed shifts) or the extruder
  16. Replies
    3
    Views
    845

    I think so, there is com port config settings and...

    I think so, there is com port config settings and there are 2 exe prusa-slicer and prusa-slicer-console which opens a command window, however I use octoprint so not messing with that at all. The...
  17. Replies
    3
    Views
    845

    Prusaslicer 2.x

    I have been using Simplified3D for 2 years (ver 4.01) and have been happy with this version. They really mucked it up when the released a very broken 4.1 and seem to be floundering and unable to...
  18. Replies
    4
    Views
    901

    Most slicers have a Z offset where you can alter...

    Most slicers have a Z offset where you can alter the starting Z point within the software so you set it to .1 and then do a -.2 in the slicer to offset the distance for the change when hot....
  19. Replies
    6
    Views
    807

    Having a small printer that works great is far...

    Having a small printer that works great is far better than a large one that doesn't
    If I had someplace to put it I would buy a mini just to have a second printer I could set up to print TPU and...
  20. Replies
    4
    Views
    660

    No idea.. just know it is in the script tab of...

    No idea.. just know it is in the script tab of S3D.
    From Simplified 3D for my printer
    G28 ; home all axes
    G1 Y50 Z0.3 F9600 ; move forward to avoid binder clips
    G1 X205 Z10 ; move off platform...
  21. Replies
    4
    Views
    660

    Do you mean when the print starts? When the...

    Do you mean when the print starts? When the extruder moves off the platform to purge? Is so that is in the slicer script code
  22. Replies
    2
    Views
    311

    All depends if you use it and get enjoyment from...

    All depends if you use it and get enjoyment from it. A set of Golf clubs would not be worth a $1 to me.. all depends on what you want to do and how much you will be doing.
    I have learned 3d cad...
  23. The filament maker provides the extruder temp...

    The filament maker provides the extruder temp range as well as bed temp for just about any quality filament on the market. Many time it is right on a sticker attached to the spool. If not just...
  24. Replies
    1
    Views
    376

    On my machine and the Marlin it runs on, I run a...

    On my machine and the Marlin it runs on, I run a auto tune with a cold extruder. It heats to the temp it needs and does it's thing and gives me an output I use as the input for M301. I save that...
  25. If I were you, and could return it for a full...

    If I were you, and could return it for a full refund, I would. Prusa is now making an affordable quality machine with good customer support (mini...
Results 1 to 25 of 275
Page 1 of 11 1 2 3 4