Search:

The only way someone using gpt chat in this forum to help them is that they will get themselves banned.

Using gpt chat to post in a discussion forum shows that the poster has no original input or...

I've just recently started printing with Bambu PETG HF and the prints have started sticking a bit too well, so I've started using a glue stick as barrier so they come off easier.

The problem is...

Seems that a few manufacturers are now recommending and including a glue stick with their new printers, even for pei sheets.

I think Vision Miner do a special spray, probably expensive. Magigoo is...

Why do Americans call Solder Soder?
Why do Americans call Aluminium Aloominum?

Will welding be called weding any time soon?

Sketchup is well known for producing poor files for 3D printing, plenty of free to use modelling programs out there.
A Google search will bring up a good variety, I use Fusion 360.
Any software...

That's because it's a forum and not a social media site.

Perhaps if you know someone with a lathe who can turn a mould with a central core and split outer shell you could then use a pourable rubber or silicone component to make the parts.

Polypropylene...

Did you heat the nozzle up to around 230 after loosening it and then tightened it up against the bowden tube whilst it was still hot?

Does the bowden tube go from the top of the hot end and right down inside it until it contacts the back of the nozzle, or to just below the top of the hot end?

The measurement of 2.16mm suggests...

Sorry, we don't do loans at the moment.

Contact Qidi support and explain the problem.

Prusaslicer and Orcaslicer are very popular at the moment.

If you now have a 'Z' offset of 0.125mm in the slicer settings suggests to me that the initial offset when bed levelling was set too close, slicer offsets are usually done in 0.01mm to 0.05mm...

Possibilities.....

Filament grinding and clogged extruder teeth.
Bowden tube route causing binding.

Is it an all metal hot end with a proper heat break above the heater block? If not it could...

Suggest....... print a 60mm square 0.2mm or one layer thick and check the layer.

Take it off the bed and see if the extruded filament shows daylight between each extrusion and little or no...

Most, if not all 3D printers have the option in the settings or filament menu to manually lower or raise the bed in the 'Z' axis by pressing a button on the touch screen.
Often in one to ten mm...

just some personal observations...........

Prusa.......MK 3 and MK 4 are reliable, well established and supported, spares available.

Bambu......X1 and P1 series set a benchmark that others seek...

Most people who want the information you are looking for know about Youtube and use that.

Is that useful enough for you ?

Orcaslicer has some CR 10 profiles in it, might be a good place to start.

Look below reply box for the 'manage attachments' button to attach images.

When I got my X-MAX 3 a few weeks ago I remember reading somewhere, probably on the Qidi website that their version of Klipper should not be updated.

I hope you get it sorted, I had nearly two...

The G-code opens okay in Prusaslicer.

However, for some reason only part of the bed shows.
Do you really need all that brim? All the Benchys I've seen did not have a brim and ought to print as...

Can you post on here one of the files the printer doesn't read, preferably a small one.

Have you tried a different SD card?
I ask because I recently bought a new USB stick and whiuch appeared...

You won't need any code knowledge.

Pick a standard slicer filament profile that best fits the set up you have, i.e bowden tube or direct drive extrder, set the bed size and max print height of...

Found this...

https://support.polaroid.com/hc/en-us/articles/360012601920-3D-Printer-and-3D-Printer-Consumables