I discovered the issue after printing a solid cube and saw that both the X and Y walls were perfectly flat. In other words, the problem was only occurring when I printed a cube with a single nozzle...
Type: Posts; User: bkmartin
I discovered the issue after printing a solid cube and saw that both the X and Y walls were perfectly flat. In other words, the problem was only occurring when I printed a cube with a single nozzle...
The pulley is very tightly secured and the bed moves smoothly. I was also concerned about the security of the glass as well, but it seems to be very secure as well. I can't find what is wrong.
When I print a test cube now, my y-axis seems to have problems. Any ideas on what could cause this? My belts are tight and I tried increasing the stepper voltage and I get the same result. The...
I can swivel my hexagon 1.75 by hand. Is it not supposed to swivel?
Cura has print profiles as well...
I used this one http://www.amazon.com/gp/product/B00D7CWSCG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 and I like the fact it mounts to the frame with 4mm screws and looks very neat. The negative...
Thanks printbus and gmay3. Based on printbus' input, I decreased the speed and increased the minimum layer time and got what I consider very good results with just a minor aberration on the corner...
I'm having problems with the corners of my test cube being "higher" then the rest of the cube. The corners are not lifting from the glass at all, but it seems extra material is left on the corners...