Close



Dig deeper, search our News website




Search:

Type: Posts; User: minneapolis-matt

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. wtf? oozing doesn't care about settings??

    Do you see what the retraction test prints in the failed prints picture below all have in common? That's right. Practically everything. They could all pass as twins. However, what they do not...
  2. Looking back at this thread and the Monoprice...

    Looking back at this thread and the Monoprice voxel thread I started the last few weeks, someone might be forgiven for thinking that I have had a great deal of trouble from my Tenlog TL-D3 Pro and...
  3. God... I thought I'd be done soon. I tried to...

    God...

    I thought I'd be done soon. I tried to level it but after leveling when I tried to tighten the "fixed" screw that must be loosened to adjust the nut that raises or lowers the E2 nozzle all...
  4. Thank god this may be behind me soon.I had found...

    Thank god this may be behind me soon.I had found nothing on clearing TL-D3 Pro clogs when searching directly but when I went to Tenlog parts supplier warm.fit to consider the purchase of a...
  5. Both extruders required a lot of external...

    Both extruders required a lot of external scraping at near operating temp with the silicone covers out of the way to even begin to assess the damage. After that i attempted to unload both filaments...
  6. Replies
    7
    Views
    1,374

    I came incredibly close to buying a Qidi Xpro. ...

    I came incredibly close to buying a Qidi Xpro. Have you done any dual material prints with it yet?
  7. So for new printer owners without a warranty, I...

    So for new printer owners without a warranty, I wonder if there is a list of parts they should have on hand to be ready for routine maintenance?
  8. My 3d printing hobby may be over for a while.This...

    My 3d printing hobby may be over for a while.This morning I made a foolish attempt to print two copies of the small over/under extrusion test in mirror mode using the ideamaker slicer recommended in...
  9. revised: find and set Z offset to the slicers...

    revised:

    find and set Z offset to the slicers equivalent of Set position command: G92 Z0.1 - I think slicers usually handle this as some variation of z offset = -.01 this will squish the first...
  10. Ok I have no clue about this. My printer came...

    Ok I have no clue about this. My printer came with a usb cable. The one time I plugged it in my printer was turned off, my pc was turned on and the printer turned itself on and the printer screen...
  11. Ok to get the ball rolling on new slicer starting...

    Ok to get the ball rolling on new slicer starting parameters.



    find and set Z offset to the slicers equivalent of Set position command: G92 Z0.1 - I think slicers usually handle this as some...
  12. So far i operate 3d printers entirely by opening...

    So far i operate 3d printers entirely by opening slt files with slicers, modifying printer parameters immediately prior to slicing and then loading the slicer generated file into the printer for...
  13. Can anybody translate this earlier post into noob...

    Can anybody translate this earlier post into noob speak for me? Trying to self educate with google just get me gems like this:

    me: "What is a Z probe?"Google: "Product Details. The Z-Probe is a...
  14. ouch. definitely not a truth I wanted to...

    ouch. definitely not a truth I wanted to hear.All right then. If I am going to be trying a bunch of slicers I sure as hell need some kind of systematic approach.I need to know which parameters to...
  15. what do you think of this design? ...

    what do you think of this design?

    https://www.thingiverse.com/thing:3065301

    It seems to be designed with direct drive printers in mind. I'm not sure where to get the rods but a visit to local...
  16. Best Dry box implementation for direct drive printers

    I want to build a dry box for my Tenlog TL-D3 Pro direct drive printer especially to help manage the moisture sensitivity of my PVA filaments during lengthy prints with dissolvable supports. I...
  17. against my better judgement last night I whittled...

    against my better judgement last night I whittled away a few minutes of my 6 hours of work night sleep to fire up the slicer, find and install from marketplace the Z-offset plugin to cura and set...
  18. I'd print this if I could spare the time not just...

    I'd print this if I could spare the time not just for the print but to follow up on any adhesion issues but I almost forgot to plan for it. I'll try to squeeze it in tomorrow.
  19. Thanks! I thought about running a print...

    Thanks!

    I thought about running a print tonight but I think I need to ruminate about what you said and see if offline and during downtime at work (of which there is a lot on the weekend) I can...
  20. perhaps my modifications are not being properly...

    perhaps my modifications are not being properly saved to the profile? I got the file dump by using Cura's export profile and opening with a text editor. I remember that the original Tenlog profile...
  21. this is all that was identifiable from the print...

    this is all that was identifiable from the print attempt as far as photographable remains
  22. first I tried opening the profile as a text file...

    first I tried opening the profile as a text file and copying here. it looks incomplete though.

    PK ! `3žëÎ Î  tl-d3pro_tl-d3_pro[general]
    version = 4
    name = TL-D3 Pro
    definition...
  23. Long term I've always felt slow prints should be...

    Long term I've always felt slow prints should be fine...if everything works. That said I am disappointed that the high 100 mm/s was way too fast. Would the vendor quoted 150mm/s ever be good for...
  24. Thanks Aardvark, For what it is worth, the...

    Thanks Aardvark,

    For what it is worth, the Voxel would print for hours and the rafts came away easily every single time, even on large time consuming prints. I suspect the slicer did its' rafts...
  25. Thanks guys! I took a picture before i left for...

    Thanks guys! I took a picture before i left for work. But didn't realize how blurry it was until i tried to upload it. Now i realize i should have also attempted to export a profile from cura...
Results 1 to 25 of 77
Page 1 of 4 1 2 3 4