Close



Dig deeper, search our News website




Search:

Type: Posts; User: airscapes

Page 1 of 13 1 2 3 4

Search: Search took 0.00 seconds.

  1. Since you have provided no info on what material...

    Since you have provided no info on what material you are printing with or any of the basic setting info needed I will make a guess or two. These are small part, and you are only printing one at a...
  2. You need to figure out how to make the nozzle...

    You need to figure out how to make the nozzle start .174 mm closer to the bed
  3. the starting height is not set correctly. You...

    the starting height is not set correctly. You need to follow whatever process the print manufacture gives you to set the initial starting height also called Z offset If the bed is level and the...
  4. Replies
    4
    Views
    245

    To print things air tight you need to have...

    To print things air tight you need to have extrusion set correctly with the proper amount of infill and perimeter over lap and number of solid layers to ensure no leaks. Also a quality filament that...
  5. check this site for ideas and material...

    check this site for ideas and material https://amputeestore.com/collections/prosthetic-liners
  6. either will be fine, as long as it is not sitting...

    either will be fine, as long as it is not sitting out in the sun. ABS does not hold up well in sun so PETG would be better. If not in the sun then use which ever you have the most experience with.
  7. A quality built machine will not need the bed...

    A quality built machine will not need the bed leveled after it has been leveled unless you physically abuse the build plate to knock it out of level. The btouch and auto level is an option that is...
  8. Yes, this is the link to the design...

    Yes, this is the link to the design https://www.thingiverse.com/thing:957958 Board base is PLA and the tiles are all the wood filament. Also made jigs for sanding the tiles and a pin cutter to cut...
  9. The person who had made the original request...

    The person who had made the original request specifically wanted the standard traditional type chess set.. I actually prefer the classic look myself, even though I do not play.
  10. Replies
    2
    Views
    167

    get a Prusa mini. It is probably the most plug...

    get a Prusa mini. It is probably the most plug and play machine, has excellent support, comes with a tuned slicer, just an all around good buy and will provide the best outcome for the uninitiated...
  11. Replies
    3
    Views
    196

    If you plan on using the printer again in the...

    If you plan on using the printer again in the next 12 hours I leave the filament installed. If not I pull up the tube and cut it an inch above the extruder.. i have a direct drive so that does not...
  12. Replies
    1
    Views
    322

    you don't need anything special to slice.. buy...

    you don't need anything special to slice.. buy the biggest badest pc you can afford so it will still function as the OS becomes a bigger badder resource hog.. longevity has nothing to do with...
  13. 3D printed wood filament chess set (from thingivers

    Finally finished this project, was going to be for a coworker but he decided he really didn't want a chess set so I am giving it as a birthday gift to a family member. eSun wood filament (my least...
  14. How much wood would a woodchuck chuck, if a...

    How much wood would a woodchuck chuck, if a woodchuck would chuck wood???
  15. Quality abs is very strong and rigid. I print...

    Quality abs is very strong and rigid. I print abs all the time, within an enclosure heated to 50C. I just printed caps to cover 1/4" threaded rod ends that have 2 .4mm walls and they are very...
  16. Replies
    7
    Views
    1,053

    I have seen that, was asked to beta test and...

    I have seen that, was asked to beta test and review it for my printer and passes.. They only wanted people with social media following and any other review got a small discount.. left a bad taste...
  17. Replies
    7
    Views
    1,053

    My Makergear comes with a Borosilicate plate...

    My Makergear comes with a Borosilicate plate covered in Polymide tape. I have tried it without the tape and it works fine for pla but I prefer the tape for ABS or other materials that won't let go...
  18. Replies
    4
    Views
    720

    yes the ender is junk.. but to answer your...

    yes the ender is junk.. but to answer your question with a more useful answer. The jerk and acceleration rates in the firmware are probably different
  19. Replies
    8
    Views
    1,011

    My prints are 100% successful as far as printing...

    My prints are 100% successful as far as printing goes.. the model may need to be changed and re-fabricated but the fabrication process does not normally fail due to printer or slicer issues.
  20. Can not see that picture, it is too small. First...

    Can not see that picture, it is too small. First thing, no fan at all, I print PETG all day with the parts fan removed from the machine. Second you are using an Ender 3 so could very well be a...
  21. Replies
    14
    Views
    4,154

    Nijatech sells Cheetah which is TPU with a shore...

    Nijatech sells Cheetah which is TPU with a shore hardness of 95. This is some tough stuff. I have made faucet washers out of it and it is working better than the soft ones you buy in the hardware...
  22. Replies
    14
    Views
    4,154

    check out the airy arm and the frog arm ...

    check out the airy arm and the frog arm

    https://www.thingiverse.com/thing:2409748
    https://www.thingiverse.com/thing:2894781...
  23. I use a cake icing spatula. for items that are...

    I use a cake icing spatula. for items that are more than 10mm tall I smack them with the wooden handle of the spatula. For smaller items I smack them with the blade of the spatula so to goes under...
  24. Replies
    2
    Views
    407

    did you call tech support?

    did you call tech support?
  25. rotate the part on the slicer bed and reslice it...

    rotate the part on the slicer bed and reslice it and see if the lines change directions Post the STL file we can understand what the part is. What infill rate are you using or is this just a couple...
Results 1 to 25 of 308
Page 1 of 13 1 2 3 4