My Pegasus Touch is still in the box as it was shipped back to me for a firmware upgrade (under warranty, minus shipping) a few years ago. With all the stuff I've been reading here, I don't know if...
Type: Posts; User: fred_dot_u
My Pegasus Touch is still in the box as it was shipped back to me for a firmware upgrade (under warranty, minus shipping) a few years ago. With all the stuff I've been reading here, I don't know if...
meshmixer (free) will add supports to an STL file, independently of the slicer
my printer is yet in the box from the KS days, so I'm truly not the best reference. I can only go by what I read and imagine. How's the scruffy surface of the build plate? Perhaps a little roughing...
out of date resin?
Is your one-point leveling build plate similar to those that use a ball joint at the clamp location? From what I'd guess, one would drop the build plate into the vat with the clamp loose, then snug...
I think you have some of the same motivations I do. I work more enthusiastically on projects that may help others than I do for my own stuff. The feedback is important too, as you've noted. My...
Children and hobbies? How can you manage?
ah, that does complicate things, doesn't it? I'd been seeing that term all this time and never made the proper connection in my alleged mind. Is there a specific value one can assign to a deflection...
ah, that does complicate things, doesn't it? I'd been seeing that term all this time and never made the proper connection in my alleged mind. Is there a specific value one can assign to a deflection...
Does the method of moving the mirror involve commanding the stepper motor to move a specific number of steps? I'd expect that the grid method takes into account the number of steps executed for...
Are you able to calculate or measure the angle of deflection/change of the final galvo? For the sake of argument, I'd prefer to consider that you're objective is to calibrate specific points on a...
I would be very surprised to learn that there is much of an ovality of the spot for the Pegasus Touch printer. My Emblaser laser cutter when well focused provides for a 0.05 mm cut. That would...
I had hoped to be able to create an image representing your objective in a pseudo-3d manner. I picture a calibration grid projected on the ceiling of a room. The last mirror in the beam travel is the...
Do you have a diagram to better explain your objective? I enjoy math, trig, geometry, the whole package, but the word problems can be challenging. If it is what I think you mean, it's very much...
I had read that cleaning the PDMS type vat results in cloudiness and possibly other problems.
If your ambient temperature is a problem, have you considered to start up your cooking oven at the...
Cooch, I see you didn't specify which non-FLS resin you've used. Was it a matter of luck that it works with the Pegasus? Is the stuff you're using less expensive than the name-brand resin?
I have a continuing search/email trace on ebay for this printer and have seen prices as high as KS level and more recently, down to US$1600, which is still rather high for a printer with such a poor...
I don't know anyone else with a Cube 3rd gen, and the forums for this item seem a bit quiet. The older models have some hacks but nothing new on the Cube 3, which is mostly the latest consumer grade...
The Cube 3rd gen is a rather polished piece of consumer equipment. It certainly was designed well, with fully enclosed mechanicals, contoured plastic panels and LED workspace illumination. Dual...
I know this is partially off-topic, but it's aimed at your astonishing reverse engineering skills. I'm a Cube 3rd gen owner and they will likely become obsolete. Their proprietary slicing software is...
Great video. Too bad about the accidental delete.
I understood that one can leave the resin in the vat as long as it is shielded from light. I've learned from my reading that it's also very important to filter out cured debris from the resin before...
I enjoy hearing of your progress with this project. I'm also quite surprised that there are no other contributors to this topic, even if only to say they appreciate the updates. You've accomplished...
Is there a solution to broken code? Revision reversal?
Your reverse engineering skills boggle the mind!
If you could open up/unlock the Cubify Cube 3rd gen in the same manner, you'd have people flocking to your door! I'd love to be able to use...