My mainboard appears to be toast. Will this work with the Anet A8 as a replacement?
https://hobbyking.com/en_us/3d0104.html?wrh_pdp=7
Cheers
Printable View
My mainboard appears to be toast. Will this work with the Anet A8 as a replacement?
https://hobbyking.com/en_us/3d0104.html?wrh_pdp=7
Cheers
I agree heavily with number40fan. If your board failed this is a time for an upgrade. All these boards are more or less the same for performance specs and handling. So the big difference in controllers becomes features supported. And as such we should all be chasing open source and touchscreen support. And mks fits that bill. Here are some suggestions to get you setup with an enclosure for a touchscreen without having to design anything yourself:
https://www.thingiverse.com/tag:MKS_TFT32/page:1
And here is a link to a touchscreen and board with integrated drivers:
http://www.ebay.com/itm/MKS-BASE-V1-...wAAOSwOgdYxRUB
Or you could get the board with removeable drivers for greater microstepping flexability:
http://www.ebay.com/itm/MKS-Gen-V1-4...4AAOSwuxFY01TE
And here is a link to an ad for the touchscreen by itself:
http://www.ebay.com/itm/3D-Printer-K...cAAOSw1JhZZL0B
And there are cheaper prices and/or closer shipping if you search around. I have done and detailed conversions with both boards in this thread:
http://3dprintboard.com/showthread.p...twork-Printers
Fixed my old board, but will probably end upp changing it in the months to come anyways (dont trust the current one, at all).
Thanks for the tips, they have been bookmarked! :D