Big sale for new model QIDI TECH X-one

The first batch of QIDI TECH X-one2 has arrived in

Amazon warehouse.


Big sale for our new model 3d printer


Limited quantity, order as soon as possible.:rolleyes:



For US customers:

https://www.amazon.com/dp/B01HZ4HY9I


For Japan customers:

https://www.amazon.co.jp/gp/product/B01IR1R95M


For UK customers:

https://www.amazon.co.uk/2018-QIDI-T.../dp/B079N91VJJ


For German customers:

https://www.amazon.de/2018-QIDI-TECH.../dp/B079N91VJJ



http://pic.yupoo.com/audreymiao0611/...4/8a9fcc54.jpg


http://pic.yupoo.com/audreymiao0611/FMtI3h2C/vVVSl.jpg

I might take the plunge but I want to know what profile to use in Simplify3D first.

The output file format is .gcode . QIDI TECH X-one is compatible with simplify 3D,Cura :o

I understand that. In the slicer software I need to pick a printer profile to use so the software knows what settings to apply. In Simplify3D we had to use a flashforge dual, I think, to get the QIDI to work until Simplify3D added a profile for the QIDI Tech-1 printer.
so, until they add a profile for the new printer we will need to know what printer can be selected in the software as a substitute.

solid looking machine.

But why reduce print volume to 150x50x150 ?

You've gone down to one extruder, so could actually have increased the build volume.

But for the price - looks like a good buy :-)

Thanks for your explain.I understand well. Our engineer has made testing on simplify 3d. Now here is 20:41 ,engineer is off work.Tomorrow I can send you the settings on simplify 3d.We are contacting simplify 3d company to add our new model.

Quote:

---

Originally Posted by curious aardvark

solid looking machine.

But why reduce print volume to 150x50x150 ?

You've gone down to one extruder, so could actually have increased the build volume.

But for the price - looks like a good buy :-)

---

I was thinking for the cost it could be a good machine for single use filament for making those little bit smaller parts where you want to keep cranking them out.

I would want to add covers to help with ABS printing.

Quote:

---

Originally Posted by QiDi 3D Printer

Thanks for your explain.I understand well. Our engineer has made testing on simplify 3d. Now here is 20:41 ,engineer is off work.Tomorrow I can send you the settings on simplify 3d.We are contacting simplify 3d company to add our new model.

---

Sounds great! Thanks for the update!

In order to meet the demands of different users,we launched this model .It's especially suitable for the family users and students.

Make Larger printing size 3d printer is really a good suggestion.:rolleyes:

yes,it's fairly good price.

You are welcome ,tomorrow I will send you the settings.:o

Quote:

---

Originally Posted by QiDi 3D Printer

The output file format is .gcode . QIDI TECH X-one is compatible with simplify 3D,Cura :o

---

whic priter i will have to setup?
Hi!:) i just buy the printer :) i would like to use Cura.. which priter i will have to setup?:)

MODERATOR NOTE: Post is late to view due to unusual delay in obtaining moderator approval

Hi I just got my QIDI TECH X-ONE on Friday there and will be unboxing and setting it tomorrow or Tuesday, would it be possible if you could send me the correct settings for it for the Simplify3D software as I use this software with my other printer, the QIDI TECH 1.

Thank You in advance for the information.

There really is no specific settings yet for S3D. You can make is work ok but I would stick with the software that comes with the X-ONE for now. It does a decent job.

Thank you for the quick reply wirlybird .. I will do that, I hope to get it unboxed and setup printing tomorrow if plans work out.

Thanks again

Quote:

---

Originally Posted by QiDi 3D Printer

The first batch of QIDI TECH X-one has arrived in Amazon warehouse.

---

I bought one and I'm thrilled with it. I've been using SketchUp 3D to design an enclosure for a NanoPi-based device. SketchUp exports STL files; Cura turns them into G-Code files, which are written to the X-one 2's SD card. There's no requirement for a serial connection between printer and computer. Eventually I'll give Simplify3D a try, but Cura is adequate for the moment. If anyone is interested, I'll write a review. This is my second 3D printer (my first was an M3D). Whereas the M3D took a while to configure, the X-One 2 worked perfectly from the beginning and required no configuration (other than to enter the correct settings in Cura). I was surprised.

I have one and like it, too. Just be prepared for x-axis cable failures with use.

Quote:

---

Originally Posted by HugoRabson

I bought one and I'm thrilled with it. I've been using SketchUp 3D to design an enclosure for a NanoPi-based device. SketchUp exports STL files; Cura turns them into G-Code files, which are written to the X-one 2's SD card. There's no requirement for a serial connection between printer and computer. Eventually I'll give Simplify3D a try, but Cura is adequate for the moment. If anyone is interested, I'll write a review. This is my second 3D printer (my first was an M3D). Whereas the M3D took a while to configure, the X-One 2 worked perfectly from the beginning and required no configuration (other than to enter the correct settings in Cura). I was surprised.

---

I used this printer.
it's very good.
I suggest buying this printer.
You can see my portfolio with this printer here