3D Printing in Sculpey

These were done with Sculpey Original, 2mm nozzle, .5mm layers:


http://hyrel3d.net/images/sculpey/sc...yround1.50.jpg


http://hyrel3d.net/images/sculpey/sc...yround2.50.jpg


Sorry about the focus. I've done some in greeen Sculpey III with a 1mm nozzle, I will bake them tonight and post images.

Pics of the green Sculpey III prints printing; 1mm nozzle, .5mm layers:


http://hyrel3d.net/images/sculpey/sc...n.pyround2.png


http://hyrel3d.net/images/sculpey/sc...n.pyround3.png


http://hyrel3d.net/images/sculpey/sc...n.pyround4.png

Here is one of the sculpey pieces (after baking) with a similar piece printed in ABS. The ABS plastic is done in .2mm layers, the sculpey in .5mm layers.


http://hyrel3d.net/images/sculpey/sc...bs.both.50.jpg

I've just been notifeid that these image links are no good. I have uploaded these images to http://hyrel3d.com/images/sculpey.rar for anyone who wants to see them. :)

Here are a couple; the blue is ABS, the rest are Sculpey.

Attachment 18824 Attachment 18825

Yes, we have heads for DIW, Robocasting, DPE, HME, HME, FFF/FDM, lasering, machining, dynamic ratio blending, core-shell printing... we've even made one weld with. Ask me if you have a special need or combination of functions that other printers will not allow you to do. We can customize just about anything.