FlashForge Dreamer

Hello everybody,

I have a flashforge 3D Dreamer printers.
Unfortunately I have problems with wifi.

I have an address range 192.168.0. ###

and now the FlashForge Dreamer has the IP 10.10.100.254

Now I have changed by software (wifi), the IP address (192.168.0.150), unfortunately I can no longer be addressed via WIFI printer.
The display from Dreamer appears 10.10.10.254:8899.

Is there a possibility to reset the Dreamer (not the small button next to the SD slot) but a factory reset where the WIFI address is reset.

Greeting Herbert

Quote:

---

Originally Posted by kannschonsein

Hello everybody,

I have a flashforge 3D Dreamer printers.
Unfortunately I have problems with wifi.

I have an address range 192.168.0. ###

and now the FlashForge Dreamer has the IP 10.10.100.254

Now I have changed by software (wifi), the IP address (192.168.0.150), unfortunately I can no longer be addressed via WIFI printer.
The display from Dreamer appears 10.10.10.254:8899.

Is there a possibility to reset the Dreamer (not the small button next to the SD slot) but a factory reset where the WIFI address is reset.

Greeting Herbert

---

I have a creator pro and was wondering how to reset the machine? what settings does it change?

thanks!

Hello,

Go here, http://www.flashforge-usa.com/support/downloads/


And download the Dreamer User Manual. It will tell you how to set up WIFI. You will probably have to start from the beginning and do it over again.