3D Printed RC Boat

A man named John Semmens has used his DIY 3D printer to 3D Print a very nice, working RC boat that measures 600mm in length and weighs about 1kg. The boat was 3D printed in 20 separate 30mm pieces and then assembled using an ABS/Acetone mixture. The results are quite nice, and the boat also run very well. Read and see more at: http://3dprint.com/16599/3d-printed-rc-boat

http://3dprint.com/wp-content/uploads/2014/09/rc3.png

Quote:

---

Originally Posted by Eddie

A man named John Semmens has used his DIY 3D printer to 3D Print a very nice, working RC boat that measures 600mm in length and weighs about 1kg. The boat was 3D printed in 20 separate 30mm pieces and then assembled using an ABS/Acetone mixture. The results are quite nice, and the boat also run very well. Read and see more at: http://3dprint.com/16599/3d-printed-rc-boat

http://3dprint.com/wp-content/uploads/2014/09/rc3.png

---

As much as I'd love to think we were the first to do it, its been done many times now... in fact ones been on thingiverse for over a year

http://www.thingiverse.com/thing:158067