Odd PETG printing issues!
Im having some odd issues when printing with HATCHBOX PETG filament.
Im using a Flashforge Creator Pro, ReplicatorG, with Skeinforge(50) slicer.
My issue is that I am seeming to get varying results with (I think) the same settings. Settings right now are:
Infill: 25%
Layer Height: .2 mm
Num Shells: 1
Feedrate: 50 mm/s
Travel Feedrate: 90 mm/s
Nozzle temp: 240 c
Filament dia: 1.75 mm
Nozzle dia: .4 mm
Bed temp: 70 c
https://s20.postimg.org/gria7wk7x/PETG_Print_Issue.jpg
in the image is the different results im getting:
On the left its all good, on the right I dont know what the issue is.
Any thoughts?
P.S. I have been leveling my print bed before each print.