Newb needs Ender 3 Support

So I recently bought an Ender 3 as a start into 3D printing.
Setup fine, read a few blogs, slowly starting to get to grips with all the new terms (not 100% there, so bear with me).


1A Bed seems fairly flat and even
1B do test print of Dog and first line gets laid down then all printing seems to stop
Have cleared nozzle (3 times!) and ensured the Feed line (ok not got that term yet) is all the way to the print nozzle (saw a number of issues on this) have cleared out nozzle and ensured clear contact (no gap) between nozzle and feeder tube.


After first line print I notice the feeder seems to stop loading filament (see image attached) Is this because its already blocked? then as the bed moved back and forwards I can feel the filament going in and out not loading more and more (See linked you tube vid) . This aligns with the fact at this point nothing is coming out of the print nozzle.
Then as it continues to print nothing it prints entirely off the right side of the plate! before I finally stop the print for fear of breaking something.


Associated vids:
Apparently these will have to follow 3 posts!!
Or this will work:
Well known Video channel rhymes with 'Poo Boob' /watch?v=evAlMA5Vp3M'
Well known Video channel rhymes with 'Poo Boob' /watch?v=n82pBh93z4k'


Couple of general Ender questions.
Presumably there are no sensors on the Ender to tell it where it is on teh Bed and when its off it? Is that right?
Are users supposed to start prints in the middle of the bed, front left or somewhere else
Have I missed an initiation step.
Without the hater chimes did I make the right call on this entry level printer?


Help massively appreciated.

I would double check the Connections, your extruder motor appears to be moving like the X axis.

Can you home the printer with the display, then individually move the X, Y and Z axis and show this in a video.

Agreed with roberts, I had this problem before and it was a problem with the axis

It is a website that has a thread of about news needs under 3 Support which is for 3D printers. Here you can check write my lab report to learn about your university task easily. They know the filament and aligns with the fact at this point nothing is coming out of the print nozzle. Join their website for more information.

For a long time I was a large manufacturer of small parts in my city. There were about 300 3D printers in my production. And then I discovered a gold mine. I started to bet on sports. Many have questions and many ask for advice. Therefore, I immediately leave a link to the next page, which will help you win more often. By the way, I have already given up with printers for a long time and sold the manufacture and now I earn 2 times more! Good luck!