3 Attachment(s)
Ender 3 pro - newbie wall gaps issue
Hi all, first print, first post!
Ender 3 Pro, Cura slice software
Attachment 16090Attachment 16091Attachment 16092
I’m getting these gaps in my walls (they’re supposed to be flat vertical) and I can’t really find a similar example on the internet to refer to and tweak my settings.
Initial layer height: 0.24
Layer height: 0.2
Print speed: 80
Initial layer speed: 30
Retraction: 6 / 25
Not sure if there are any other settings you’d need so let me know.
I presume this is a newbie issue so hopefully someone can give me some pointers. Thanks in advance!
Ben