Printing bins/boxes that come out flimsy with thin walls.

I'm having issues printing bins/boxes that keep coming out with thin flimsy walls. I'm using a Anycubic Chiron with .2mm nozzle. My layer height is .2, wall line width .4, wall thickness 1.2, wall line count 7, Top surface skin layers 1, top bottom thickness 2, top layers 5.

just a side note i don't think you should be printing the same size as your nozzle just something to keep in mind if you want to print bigger layer lines change out your nozzle.
Mabey add some pictures so we can see what might be wrong with the boxes

Quote:

---

Originally Posted by 3DPrinterMan1234

just a side note i don't think you should be printing the same size as your nozzle just something to keep in mind if you want to print bigger layer lines change out your nozzle.
Mabey add some pictures so we can see what might be wrong with the boxes

---

Good point. I just realized that my nozzle is actually .04 but when attempting to change nozzle size in Cura it only gives me the option of .01, .02, or .03.

try using a mouse and scroll down to change the size. if not mabey try youtube for help