Print Globs Mid Print

Print globs up mid-print. It fails at a different layer every time. Attachment 12939 Anyone see this before? Could it be the fact that it's narrow? I can provide any pertinent settings
Cura 4.0
Gcreate Gmax 1.5+
Headed bed 55c
PLA+
215c
45mm/s feed
fan at 65-85%
No Support

Any assistance would be greatly appreciated!

I hate to be a pain but no one has any suggestions?

Would really like to help though have no experience with your 3D Printer.
If you could provide more information any maybe a link to a Video we could watch showing the error someone could possibly have some incite.

What we could use is the STL file you are trying to print with what slicer you are using and its settings. included with the above mentioned video.

Quote:

---

Originally Posted by Roberts_Clif

Would really like to help though have no experience with your 3D Printer.
If you could provide more information any maybe a link to a Video we could watch showing the error someone could possibly have some incite.

What we could use is the STL file you are trying to print with what slicer you are using and its settings. included with the above mentioned video.

---

I use Cura 4.0.0 on Windows

Quote:

---

Originally Posted by Architect401

I use Cura 4.0.0 on Windows

---

Sorry I had to have 3 posts before I could post links
It has a heated bed and a metal hotend. If you need anything else I will try to provide the info.
It is not modded in any way.

https://1drv.ms/f/s!Allz4jwuiz47mWDlInCMA9mTUqLy is the STL file.
https://1drv.ms/f/s!Allz4jwuiz47mV_BOKRl86mKx30b is the Cura Profile.

The demo version is was to test and see if it was a failure at a specific height and it failed at various heights the 3 times I tried printing it. When rotated so that the threads are at the top the dimensions should be 65.88mm tall (longest dimension).
I was able to print another file using the same settings but slightly wider and 5.5 inches tall with no failures.

Not much closer that I was before. Would not let me import your Cura 4 Profile.

Attachment 12965

Had to scale the Stl file by 25.402 in order to get the suggested Z height.

Quote:

---

Originally Posted by Roberts_Clif

Not much closer that I was before. Would not let me import your Cura 4 Profile.

Attachment 12965

Had to scale the Stl file by 25.402 in order to get the suggested Z height.

---

So it seems that for you to get the profile to work you have to set your machine to a Gmax 1.5+

Here is the Settings used for that profile:
https://1drv.ms/a/s!Allz4jwuiz47mWMqEmGxXC_VrONA

I would increase the infill density to 30% for this object. This is an increase of only 5%

Quote:

---

Originally Posted by Roberts_Clif

I would increase the infill density to 30% for this object. This is an increase of only 5%

---

My mistake, I must not have saved the profile as I usually run at 35% for most of my PLA parts.

I am currently test running PETG to see if I get better results. Any thoughts as to what would cause the material to goop up?

I would try increasing your density, also check the "final printing temp" make it the same as the overall default temp