my smallest print

This is about as small as i can get my printer to go, any smaller and its messy.. Aussies will know the size judging from the coin, but the frog is just shy of 1cm long, printed at 0.1mm
The toes printed fine, but I messed one up getting it off the heatbed, i was impatient :)

While printing big things is impressive, it can take hours.. if you want to also test your machine, try printing super small, you soon know if you are calibrated and levelled.

* Edit, further testing has given me a smaller frog than this photo! I managed to get it down to 8mm, need a better camera tho to take the photo, iphones not much good at native macro :/


http://www.devogeninteractive.com/pi...7_52B0567A&jpg

Quote:

---

Originally Posted by Geoff

This is about as small as i can get my printer to go, any smaller and its messy.. Aussies will know the size judging from the coin, but the frog is just shy of 1cm long, printed at 0.1mm
The toes printed fine, but I messed one up getting it off the heatbed, i was impatient :)

While printing big things is impressive, it can take hours.. if you want to also test your machine, try printing super small, you soon know if you are calibrated and levelled.

* Edit, further testing has given me a smaller frog than this photo! I managed to get it down to 8mm, need a better camera tho to take the photo, iphones not much good at native macro :/


http://www.devogeninteractive.com/pi...7_52B0567A&jpg

---

Pics or it didnt happen!

It's not ek zack ly big, is it?

OME

Quote:

---

Originally Posted by aeviaanah

Pics or it didnt happen!

---

A challenge!

Well, I calibrated my machine again and I beat it again, we have 5.5mm

http://www.devogeninteractive.com/pi...9_52B124E0&jpg

Any smaller and they'll be tadpoles!

Quote:

---

Originally Posted by old man emu

Any smaller and they'll be tadpoles!

---

haha you and my wife have a similar sense of humour, exactly what she said :)

That looks pretty detailed for being so small. What printer setup are you using?

Quote:

---

Originally Posted by Geoff

A challenge!

Well, I calibrated my machine again and I beat it again, we have 5.5mm

http://www.devogeninteractive.com/pi...9_52B124E0&jpg

---

Awesome man! I stand corrected :o

WOW! That is brilliant! What hardware are you using? :D

Brilliant!!

It's a flashforge creator

Flashforge owners are reporting very good printing results from their machines. it is more that a Replicator 1 clone, it has some upgrades over the original Replicator. I love that frog print! I might try to print some miniatures after the holidays.

Attachment 293

Quote:

---

Originally Posted by JohnA136

Flashforge owners are reporting very good printing results from their machines. it is more that a Replicator 1 clone, it has some upgrades over the original Replicator. I love that frog print! I might try to print some miniatures after the holidays.

Attachment 293

---

I'd be more inclined to say a makerbot 2, 2 heads, identical size, identical resolution, identical build area, dual head - but can do ABS and PLA, whereas the makerbot 2 cant to ABS.

The Replicator 2 has no HBP and is designed primarily as a PLA Printer. The Replicator 2X has a HBP and was designed primarily as a ABS Printer. People are having a lot of problems with their 2X when they try to print PLA? Something about the extruder on the 2X?

I would never buy another printer with no HBP that could not print at least ABS and PLA? I don't have one, but for ~$1000.00 less, I would seriously consider the Flash Forge over a Replicator 2. PS, We love our modified MakerBot modified Replicator XL. It has a dual extruder but after a few novelty prints when we first got it, we have never used them both on the same print. Just my .02

Quote:

---

Originally Posted by JohnA136

The Replicator 2 has no HBP and is designed primarily as a PLA Printer. The Replicator 2X has a HBP and was designed primarily as a ABS Printer. People are having a lot of problems with their 2X when they try to print PLA? Something about the extruder on the 2X?

I would never buy another printer with no HBP that could not print at least ABS and PLA? I don't have one, but for ~$1000.00 less, I would seriously consider the Flash Forge over a Replicator 2. PS, We love our modified MakerBot modified Replicator XL. It has a dual extruder but after a few novelty prints when we first got it, we have never used them both on the same print. Just my .02

---

The PLA problem comes from the myth that PLA needs to be melted at 60c. I have PLA that won't extrude until 200c.. it all depends on the filament, I do not have 2 rolls that behave the same.

Where does it say to extrude PLA at 60c? The HBP (if you have one) should be set to ~60c for PLA and the extruder should be set to ~220c. We usually extrude PLA around 210-220 on our Prusas. We may need a new topic for this as we are muddying this one?

that would be on page 1....

Quote:

---

Originally Posted by he3d

what kind of hardware that you are using?

---

Quote:

---

Originally Posted by Kingoddball

WOW! That is brilliant! What hardware are you using? :D

Brilliant!!

---

Quote:

---

Originally Posted by Geoff

It's a flashforge creator

---

PLA doesnt stick to kapton tape very well.. You would need to put some painters tape of some sort if you want to print PLA on your Makerbot 2X :)

Quote:

---

Originally Posted by Merko

PLA doesnt stick to kapton tape very well.. You would need to put some painters tape of some sort if you want to print PLA on your Makerbot 2X :)

---

PLA sticks fine, if not better on Kapton tape than ABS does for me.

I have a fairly opposite experience, blue painters tape to me, for lack of a better word is crap. Nothing sticks to it, the heat doesn't penetrate it very well from the heatbed.. I prefer to just change my kapton tape every few months and have a very nice clear shiny finish on my objects. If you are after a good finish and are printing raftless, kapton wins hands down for me.