Printable View
Hey, everyone!
I just got my first printer and it is working well with gcode files that came with it, but when I try to print something from Cura it just don't move or react.
Anyone could help me about what I'm doing wrong?
It shows in the screen as if it's printing, but as youc an see in one of the images, the printer didn't even moved from it's starting point.
Attachment 15644 Attachment 15645
This is a GCode created at Cura I'm trying to print GCode File
I am 3D Printing your 3DBenchy now.
You may have selected the wrong settings for Machine configuration.
https://www.youtube.com/watch?v=0EORGq6fpt8
First try I just selected the printer at Ultimate Cura 4.8 version and nothing happened. I uninstalled Cura and deleted all files and started doing the same thing and no result.
Is there something I need to do at my printer? Is it needed to change firmware or something like that? Because I am running out of options now. I had already watched the link you sent and nothing changed.
Is it possible I need to change the GCode Flavor? I set it as Marlin, but never changed anything at printer.
The Video I post stated that you should select Marlin at 3:00 minutes into video, Post one of the G-Code Models that do work will look inside.
I was thinking if I should change the firmware of printer to Marlin instead of Tronxy's.
Here is one of those that works on it:
Dinosaur
Quick look inside Dinosaur.gcode reveals :Flavor:Marlin
Attachment 15652
You're right. I saw that after posting. I tested other original files from Tronxy and not even all of them are printing. Only 3 out of 5 original files are working. It can't be something on the printer because it's working for some files, but it's really annoying that it doesn't work on any file I create =[Quote:
Originally Posted by Roberts_Clif
Post your Profile form Preferences > Configure Cura... > Profile Select the Profile you sliced with and Post Export.
Post your Printer form Preferences > Configure Cura... > Printers > Machine Settings Screen Capture window crop and post.
This should be enough to see what is happening in your slicer, an determine if we need to check the printer.
Thx for all the help.
Here are the files:
GCode
Printer Settings
Profile
I sent a new Gcode because I've been trying different things to fix it, but none is working, so maybe my gcode from now is different from the first I sent.
As your first layer start at full speed I would change add Top/Bottom Speed.
Attachment 15658
On most models I print with a print speed between 65-86% My Start speed varies between 32-56% depending on complexity of model.
I believe you would experience better prints starting out in this area.
I found out the problem is with the printer. I'm sending it back and asking for a new one since it came in the last few days and here in Brazil we can give up in seven days.
I'll send an update when the new one arrives and thanks for the tips. I'll work on that too.
O !!!
Post when you need any Help