Does anyone have any opinions on 3D Scanners. There is so much information out there about 3D printers, but very little for Scanners. If I wanted to purchase a 3D scanner, where would I ever start?
Printable View
Does anyone have any opinions on 3D Scanners. There is so much information out there about 3D printers, but very little for Scanners. If I wanted to purchase a 3D scanner, where would I ever start?
Agreed. Different scanners for different applications. I have a Kinect that I use with ReconstructMe, and it's great for larger objects, such as people. You'll never get super-detailed scans with it though, but if you want a selfie, it's a good start.
Have you tried David Laserscanner? With a little dedication you can get some really quality scans of smaller objects. Their structured light package is fantastic too.
If you want to drop some serious coin, you could get an Artec S. http://www.artec3d.com/hardware/artec-s/.
I would not suggest the NextEngine scanner though. Haven't had good experiences with it. That was some time ago, but to my knowledge they haven't updated it.
I'd like to have a home scanner option I could send to customers to scan an item that I can then print for them. I've tried the 123d Catch app but just not high enough quality yet. Any of the scanners out there good quality, sturdy but light, and inexpensive? I know...hoping for a lot!
Yeah, the problem is that if they're technically inclined enough to scan it themselves, they'll probably find a way to cut you out from the printing process too, you know? Hahah...
Umm.. just trying to think. Moedis Lite is a free app for the iPhone that is kind of like David Laserscanner. You might be able to pull decent geometry off that, but again, there's some setup involved.
If you do try it out though, let me know! I'd be interested in finding out what the results are like!
@Kevin- Good questions. Actually, I will typically model stuff free-hand, but when it's something small, David Laserscanner works great. If it's a person, yeah, I'll totally use the Kinect.
The reason I use ReconstructMe is for two reasons. 1) It's free. 2) It scans in a continuous path, so that I can travel around the object, and it will stitch everything together, rather than taking individual "photos."
Now, those two points being said, KScan COULD actually output a better model. When I went to try it sometime back though, I couldn't get it to recognize my scanner, so I eventually tried some other programs, and ReconstructMe was my next best option.
BTW, I'm using the older version of ReconstructMe (which uses command prompts). I haven't had a chance to play around with the version that's currently up on the site. http://reconstructme.net/
@CreativeCoPilot - Thanks for the responses. Have you had any issues with the David LaserScanner? I've only tried it once and the mesh required a significant amount of cleanup to be usable.
The Pro version has tools to automate a lot of it. So when you're done, you should have a completely closed mesh. If you have outlier data, there are tools to cut all of that away. Also, just bump up the resolution to like 1k before fusing everything together, and your model should have a lot of detail.
What you "can" do... and I really don't suggest doing this, but if you have the free version of DLScanner, and a ton of outlier data, and nothing is working for you at all, you can align your scans using Meshlab. Trim everything away using Meshlab's tools, and then bring everything into ZBrush as either one subtool or separate merged subtools, and then dynamesh them all together as one object. I'd suggest keeping the resolution above 400 (but then again, it depends on how large your object is).
If you hit Subtool ->Split ->Split to Parts, the outlier information should become separate groupings that you can just delete out really easily. This is all to say that you DON'T have the Pro version of DLScanner (but do have ZBrush). So, that's a work-around. A bit of a headache, but at least one method of maintaining the quality of your geometry.
I'm not sure what software you're using to edit your models though, so this is all just guesswork....
Try to have a look on this project in Germany. It is very cheap and a open project. http://hci.rwth-aachen.de/fabscan
If I were to recommend a Scanner, I would have to go with the most popular, simply because there is the most information out there on forums, blogs, etc about it. I'd suggest the Digitizer by makerbot.
Honestly I think this is a very difficult question to answer, because most of us only have experience with 1 or fewer 3D scanners. Hard to compare when you haven't tried all of them. Like Eddie said, the Digitizer is probably the most popular one, because MakerBot does a lot of advertising for it, and the mere fact that they are a big company. However, I can't really say if it's the best.
I've been hearing a lot of great things about the handheld 3D scanner made by 3D Systems, called the Cubify Sense. For $399 it seems like a good deal, however you are the one who has to do all the scanning work. It's not just a table top scanner like some: http://cubify.com/sense/
I haven't personally used a Cubify Sense, but for some reason I don't think it would do that great of a job on smaller details. Has anyone here had the chance to use one yet?
3D Systems considers a "small" item a basketball! You can set it on small, medium and large items. if you plan on scanning anything smaller than a basketball, it is not the scanner for you! Here is a print of a profile scan using the Sense.
Attachment 310Attachment 311
Unfortunately there aren't many scanners to choose from. At least not good ones. I don't even know if I'd consider the Digitizer to be that great. It's probably the best on the market but still has its flaws.
There are actually quite a few different scanners out there, but few of them are as inexpensive as the Sense. I've been experimenting with it, and having pretty good luck with larger objects, like full-body scans of people. It works less well with smaller objects, although I'm working on a modification that might help with that. If you want a scanner that captures high levels of detail, though, this isn't the scanner for you. I'm not sure the Makerbot digitizer would be either; it looks like its resolution is pretty poor (+/- 2mm), and it can only deal with small objects that fit on its turntable.
I've also been using the Capture scanner from 3D systems, and I've decided to start reselling it. It does a really excellent job of recording small details - I just scanned a grapefruit, for instance, and it faithfully captured the small pores in the skin. It's also quite fast, although it isn't the kind of scanner that continuously records data as you move around. It wants to be set up on a tripod, spend a minute or so recording surface data with patterns of blue light, then capture more data from a different viewpoint etc, until it's got views of the whole object. Then the software it comes with lets you align and merge all the scans into one. These scanners list for between $15k and $25k, depending on the software one gets to use with it (there's a choice of 6 different programs for reverse-engineering, part inspection, etc.) but I'll be discounting it a little.
Andrew Werby
www.computersculpture.com
Has anyone tried the materform?
I have looked at getting one but looking for user reviews (unless its not out yet)
Have anyone had Artec Eva scanned sample (file / picture) ? As Mr. JohnA136 has posted the sample picture from SENSE, I really want to see the comparison between these 2 scanners. Thanks.
Have a look at this video somebody did:
https://www.youtube.com/watch?v=H3WzY8EWM9s