Printable View
I currently have 2 prusa i3 based printers that print around 200x200. Im looking for some plans for a new printer that will allow me to print 350-400mm atleast 1 way both would be preferred.
if anyone can point me in the general direction so i can get started on building and getting all the electronics in to build a new printer.
Thanks
Troy
My son just built a Wilson 2, I think it prints 200 by 300. It is like a Prusa i3 in Steroids (we have three i3s), build is very beefy and prints very well.
Always interested to see peoples projects so we will be watching this. I hope the build goes well. Please post photos if you have any.
At Hyrel, we just announced our larger format printers, with up to 600x400x275mm (X/Y/Z). See http://3dprintboard.com/showthread.p...-from-Hyrel-3D
Also look at the SEEMECNC ROSTOCK MAX v2!
Nearly 1300 cubic inches of build volume (10.5+" Diameter by 15+" height)
Comes as build it yourself kit or pre-assembled
Last year I built a C-Bot, 12x12", by 21" tall (totally configurable, that's just what I chose). Great project:
http://www.openbuilds.com/builds/c-bot.1146/
http://www.akeric.com/blog/?page_id=3063
Awesome looking printer AK Eric! Your blog is thorough and informative, thanks for sharing.
Thanks, appreciated. It was a great project, and the community offers a lot of help.Quote:
Originally Posted by JohnA136
My son just completed building his new Rostock MAX v2. (I knew he could not come back from the Midwest RepRap Convention without a new printer!) Took a good bit of time but it is built like a tank and is solid as a rock! They give you everything but the two extruder fan shrouds....those are the first prints you have to do. So this is print number one, the extruder tube fan. Resolution and finish was awesome! Build volume is HUGE!
Attachment 9127
Attachment 9128
Attachment 9129
I apologize for the sideways pictures, they show correctly on my computer and phone?
Let's see if this works?
Attachment 9132
I have owned around 9 printers now.. The rostock max v2 was my first ever printer.
My thoughts on it.
The build volume is NOT as big as it could be, because its a delta, meaning its a circular build plate, so you have to square off the circular area to get the build area (unless you print 100 tiny parts that fit in to those circular corners). It can print call, but X and Y not a ton.
Now I preface this by saying this was my FIRST 3d printer, and i learned a lot by building it, but i didnt feel like the print quality was good enough. Howevver, after owning many more over time, i put it on par with a prusa or rep rap printer. No where near my FlashForce Creator pro for quality. but on par with the others.
Leveling the bed was a nightmare. way harder than a square bed... Maybe there is ABL on it now. which would be great.
i dont want to sound down on the rostock max because I think its super cool, i just think for you wanting bigger than you have now, you need to look at something bigger.
You can build a gcreate xt1.5+ 16x16x21. I have one coming tomorrow (fully built) but you can DL the files and build it yourself.
Can you just adapt a smal size printer to a larger one, just by changing the frame?
Generally, yes. We took out Makerbot Replicator 2 and made the Z Axis 50% higher by changing the rods and case and it works fine. Practically any RepRap can be changed in size pretty easily. SeeMeCNC had a 15 foot high Delta Printer that prints awesome size stuff.Quote:
Originally Posted by Chaparro1973
May want to take a look at these as well.
http://www.thingiverse.com/thing:1001065
http://www.thingiverse.com/thing:794261