Howdy, I've been lurking for a while now and I've finally pulled the trigger and ordered a 10" Pegasus. Since I am not seeing a whole lot of info about these yet I thought I'd post my experience with building the kit. I am a complete novice, having done nothing but read forums and watch youtube videos so far. So lets get started, shall we?
Yesterday I went and picked up my kit which I had ordered from Makerfarm. I ordered the printer kit with a single extruder with e3d-v6 hot end instead of the lite version, graphical lcd, and I also upgraded the X, Y, Z Motor Mounts, X idler and X carriage to Metal. When I opened the package I found everything well protected and well wrapped along with a checklist to make sure everything was in the package.
http://i685.photobucket.com/albums/v...psruoamuvs.jpg
And here's what all the parts look like once unpacked...
http://i685.photobucket.com/albums/v...ps1hihoft3.jpg
And here is my contribution over and above what the comes in the kit:
http://i685.photobucket.com/albums/v...pspsjp0mo6.jpg
You will have to stay patient with me as I'm busy trying to keep a business afloat and busy with lots of kids so I may only get an update or two per day as opposed to a marathon build to the end. Everything looks to be in order as far as the kit goes and next I will start putting together the frame as per the instructions. Chow for now.