Originally Posted by
Syd_Khaos
For PLA I start bed temp at 75c. At layer 3 it drops to 70c. At layer 5 it drops to 65c for the rest of the print.
ABS is 110c, then down to 100 at layer 3 and 95 at layer 5 for remainder of print...I do PeTG same but 20deg lower at each step. This is probably a bit high for most PeTG, but seems to be needed for the clear I'm running.
Never messed around with PVA, seems like a waste of money to me......sandpaper (and even sandblasting) is much cheaper and same end results.