yes is was changing it on S3d trying to see if it make a difference with some Gaps/Layer Shift between layers im getting . but i didn't know the fact that the firmwares limit the movement....
also i was wondering what average speed works for you . i have found that the default setting are Extremely Fast compromising the print quality . i tamed down to this and still found to be fast for prints like this one i just did .
http://3dprintboard.com/attachment.p...tid=4840&stc=1
ABS 0.3mm 230C 15% infill
http://3dprintboard.com/attachment.p...tid=4841&stc=1