Quote:
Connecting...
start
Printer is now online.
echo: External Reset
Marlin1.0.0
echo: Last Updated: Nov 8 2014 17:55:19 | Author: (MakerFarm Inc, 10" i3v Prusa, dacb)
Compiled: Nov 8 2014
echo: Free Memory: 3519 PlannerBufferBytes: 1232
echo:Stored settings retrieved
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z4000.00 E859.00
echo:Maximum feedrates (mm/s):
echo: M203 X250.00 Y250.00 Z2.00 E22.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X1000 Y1000 Z5 E1000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S500.00 T500.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo: M301 P22.20 I1.08 D114.00
echo:SD init fail
>>>M114
SENDING:M114
X:0.00 Y:0.00 Z:0.00 E:0.00 Count X: 0.00 Y:0.00 Z:0.00
Quote:
>>>G28
SENDING:G28
Starting G28
1 G28 home_all_axis
G28 homing X axis.
0.00 = position of X axis.
G28 homing Y axis.
0.00 = position of Y axis.
G28 doing home of Z axis towards bed.
0.00 0.00
G28 doing Z Home towards bed.
0.00 0.00
G28 done Z Home towards bed.
93.00 131.00
G28 fixing Z offset.
93.00 131.00 10.00
G28 position set to.
93.00 131.00 10.00
>>>M114
SENDING:M114
X:93.00 Y:131.00 Z:10.00 E:0.00 Count X: 93.00 Y:131.00 Z:10.00
2nd G28, Homes to 0,0 then returns to centre and probes Z
Quote:
>>>G28
SENDING:G28
Starting G28
1 G28 home_all_axis
G28 homing X axis.
0.00 = position of X axis.
G28 homing Y axis.
0.00 = position of Y axis.
G28 doing home of Z axis towards bed.
0.00 0.00
G28 doing Z Home towards bed.
0.00 0.00
G28 done Z Home towards bed.
93.00 131.00
G28 fixing Z offset.
93.00 131.00 10.00
G28 position set to.
93.00 131.00 10.00
>>>M114
SENDING:M114
X:93.00 Y:131.00 Z:10.00 E:0.00 Count X: 93.00 Y:131.00 Z:10.00
G29 after second G28, all probes are done around the middle of the bed
Quote:
>>>G29
SENDING:G29
Eqn coefficients: a: -0.00 b: -0.00 d: 1.33
planeNormal x: 0.00 y: 0.00 z: 1.00
Bed Level Correction Matrix:
0.999997 0.000000 -0.002513
-0.000001 1.000000 -0.000342
0.002513 0.000342 0.999997
echo:endstops hit: Z:0.94
>>>m114
SENDING:M114
X:118.00 Y:156.00 Z:4.92 E:0.00 Count X: 118.01 Y:156.00 Z:4.57