Are you talking about this part?
Attachment 9596
Because I can see where on this example I haven't hit "select all", but I know on the one I showed previously, they were both definitely selected.
Printable View
Are you talking about this part?
Attachment 9596
Because I can see where on this example I haven't hit "select all", but I know on the one I showed previously, they were both definitely selected.
I knew something was wrong, odd, quiet ... I haven't even turned on a single printer this evening!
Hmm, weird. Maybe I'll have to write them on it.
In the meantime, can anyone share their PLA retraction settings? I've been trying to make some Catan tiles, and the ones prone to stringing (ie. woods) are stringing reeeeeeeeeeeeeally badly.
You know what I really want is a bright reddish copper color filament.
I have been looking for some nice metallic that won't break the bank. Most stuff is muted colors
I have a demon form I would love to dual print the colors. The more I see you guys talking about the S3D settings for the QIDI the more I want too.
Anyone got suggestions?
All of that time printing and fighting with blower nozzles seems for-not. I installed the single left one and it drags on the bed.
I wonder what is different? My print of that nozzle does not. As I'd mentioned it was necessary to cut down the length of the flat head wood screw that I used to tie the duct to the clip-on support bracket. The first time I attached it to my QiDi I mounted it incorrectly. The bracket goes on first, then the duct below it.
Oops, I had assumed it was the dual that you would have problems with. The left only does not seem to cause me any difficulty. Here is a pix of it in action right now...
http://i.imgur.com/rnQ27xm.jpg