i am printing with pla 1.75 filament and i dont know how to do a temp tower
Printable View
i am printing with pla 1.75 filament and i dont know how to do a temp tower
That is a fairly high temperature for Printing PLA filament.
I am using 1.75mm pla and i dont know how to do a temp tower
sry for posting twice
what temp should i print at
and how would i do a temp tower
Using Cura load a temp tower like this one on thingiverse
https://www.thingiverse.com/thing:2493504
Then Using tweak At Z-3.0.1 with Cura I find where the layer temp increase and using that layer enter in tweak At Z-3.0.1.
This means that I will be using 8 tweak At Z-3.0.1 for the 8 temperature changes.
The temperature is usually printed on the roll of filament.
On My machine I print PLA between 196- 206
Though printing a temp tower will show you the best filament temperature.
can you find me a video
The nozzle looked like it was not dispensing fast enough
Nozzles have to be replaced once in a while they are in the list of consumables, though you may need increase the hot-end temperature for your filament.
Do you hear clicking, this could be a sign of the filament slipping causing under extrusion.