Here is my test cube 25 X 25 X 30 high. 1 shell 0 top & bottom, no infill. Basically default settings for PLA (yes this is the orange that shipped with the printer!!). Extrusion multiplier .88, nozzle .4 and width manual @ .4 and layer height .2. The extrusion width is pretty good now but it's the height I am having a problem with.
The height should be 35mm I get a pretty consistent 34.75.
How can I adjust the height?
The discoloration on the sides I think is temp. I am going to run a test of graduated temps to see where the best might be.
Otherwise it seems to be printing like a champ.
[IMG]
http://i58.photobucket.com/albums/g2...pss3xypamt.jpg[/IMG]