Quote:
>>> m503SENDING:M503
echo:Steps per unit:
echo: M92 X100.00 Y100.00 Z4000.00 E600.00
echo:Maximum feedrates (mm/s):
echo: M203 X300.00 Y300.00 Z3.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X1500 Y1500 Z100 E2000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S1500.00 T1500.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:Z_Probe_Offset (mm): 0.30
Lookee there 0.30 which is what the old Z was before the new arm and switch. Now what value should this be 2.1 or 3.8/85/9?