Thanks for the detailed comments Printbus :)
Here are the pics you asked for:
http://3dprintboard.com/attachment.p...tid=4231&stc=1 I have played around with the extrusion multiplier but it did not make a noticeable difference.
http://3dprintboard.com/attachment.p...tid=4232&stc=1My fan is wired directly to my power supplie's 12V so its constantly cooling my hexagon hot end.
Im starting to think the problem is mechanical because my Y bed belt seemed pretty loose. Its adjusted and fixed now. Also when the hot end is fully heated im about 2 paper thicknesses above the glass. Probably too far right?