Originally Posted by
Geoff
ABS has as many quirks as PLA for me, but essentially now for white filament, I use the stock 110c and 230c but for all other colours, my bed is around 106 - 107 and the hotend 225 or 226 for some.
I have alot of ABS that has different tolerances too, eg. I have 2 blue ABS, same colour, but one will not print at 0.1mm and one will, both from the same supplier.
I can print at 0.2mm fine, but when I try and go down, it makes a total mess of the print, whereas the other blue stays strong. I was getting really annoyed with constantly having to fiddle with temps after changing I tried to find the happy medium, and in a non heated cabinet, on an old crappy flashforge, 225c and 106c seems to be my magic spot on Kapton. With blue tape I can lower the bed to 100 and it still sticks like glue.