-
2 Attachment(s)
Have you found the secret setting of 3D Printing the smaller more detailed models.
If No then Continue.
In my printing of PLA it likes to be printed between 192-202C with a Bed temp of 40-60C.
Depending on your 3D Printer the start speed can be a 30-50% as compared to the 100% set in the slicer as full speed.
After the first layer has printed you can increase the print speed. I can print from 72-86% near perfect Models quite easily though have printed faster with a few Print flaws.
I have in the forums uploaded my Cura's profiles they include Cura 15.04.6 - Cura 4. An have used other slicers thou continue using my trusty Cura slicers.
Again here are my Cura Profiles
-
I run 210 on my nozzel and 60 on my bed for hatchbox pla. You may have a bad slicer
-
If the filament is curling around your nozzle then it is a sign that your z-height is too high.
-
Magigoo
I agree. I have 7 3d printers from different brands and find a bit of Magigoo solves most print bed adhesion problems.
-
Throwing is definitely not a good idea dear, you can go for repairing.