What other modifications have you done to your printer?
Printable View
If you go back in this thread I made a list of printed parts that I recommend to help with filament path alignment.
I only modified the extruders, firmware and use a glass build plate.
Hi all, pretty interested in this printer but it's hard to find pictures of sample prints. Would some of you be willing to share more and give a perspective after the new printer vibe has worn off? This forum seems to be the only active one about the qidi!
I have a few pictures of things I printed with my Qidi. I did 4 Tardis's for friends and all of the red parts on the CTC Printer and the windows where for a friend that does highly detailed railroad layouts. I don't have pictures of everything.
Attachment 8736Attachment 8735Attachment 8737Attachment 8738
These are the setting that I'm currently using:
Nozzle temp:205
heat bed: 20
These settings might not be completely correct but I was able to successfully print a vase shape. I'll post a picture of it later today.
Attachment 8742Attachment 8754Attachment 8747Attachment 8744Attachment 8745
Not my design it's a multi part snap together print that can be found at https://www.thingiverse.com/thing:124033