Well Fishpaste! Everything was going great. I didnt get to a finished print yet but i am getting closer. Here are the results of my first 3 attempts..
https://imagizer.imageshack.com/v2/xq90/924/aOD6i0.jpg
https://imagizer.imageshack.com/v2/xq90/924/l3g9zY.jpg
And then it happened. I decided to shorten the PTFE tubes to reduce friction and before I started playing around with the retraction settings. I shortened the tubes and fed in the first filament all the way with the nozzle hot. I should have let it cool first and fed all three in and then warmed it and fed each one in a little bit at a time. The filament went in and squeezed out the 2 unoccupied heatbreaks past the transition zone and into the cold end. I have my work cut out for me to clear this jam..
https://imagizer.imageshack.com/v2/xq90/923/mq6Es5.jpg