Anycubic 0.6mm nozzles

Everyone, I just received a new Anycubic Kobra 3 Max (similar to the Kobra 3, just bigger; the nozzle parts should be compatible).So one thing I notice now that I've had this unit for a few weeks is that I prefer to print faster with larger nozzles, but I am having a heck of a time trying to source a 0.6mm nozzle tip for this printer. The tips are definitely not standard, they are unique. Anycubic advertises that they are capable of printing at 0.2 - 1.2 mm nozzle size, but I have yet to find anyone who actually sells anything other than 0.4mm nozzles for this printer. Any ideas, much appreciated.... And yes, I've considered buyin another 0.4mm nozzle and then drilling (enlarging) the nozzle to 0.6 mm (well, technically w/ a 0.55mm drill bit..., if that makes sense?).Appreciate you all, and thank you for taking a look at my dilemma.

I found this link

Attachment 20116

That is exactly what I was looking for! Thank you!

Do not know how good the information is though you can search again using the description on the link.

I visited the HzdaDeve store and could not find these nozzles.

I placed an order...seem a bit pricey -- kind of as if they buy them from AnyCubic and then drill them out but it is what it is for now. I'll report back once I get them and run my next few builds. Fingers crossed.

Was going the suggest just that, though you are correct.
Have a Pair of the Any cubic Kobra 3 Combo 's
Purchased a full set of nozzles 0.2mm 0.4mm 0.6mm and 0.8 mm a set for each Kobra its only money and what's life without fun hobbies.