Printable View
Ive used both makerware and replicatorG. I am running the newest sailfish. I litterally just got the printer yesterday and I was printing in ABS fine. But today when I switched to PLA I noticed that even though I set the extruder temps to 180 when it prints it goes to 230 which makes the plastic run. Ive tried both programs like I said, Ive tried making custom profiles and everything. Even when I manually change the GCode it still just does 230. How do I fix this?
Can you please post the first 50 or so lines from the gcode ? it should be coded in thatQuote:
Originally Posted by random11
If set to 0 it correctly doesnt turn on but otherwise its always 230Quote:
Originally Posted by Geoff
Code:(**** start.gcode for The Replicator, Dualstrusion! ****)
M103 (disable RPM)
M73 P0 (enable build progress)
G21 (set units to mm)
G90 (set positioning to absolute)
M109 S0 T0 (set HBP temperature)
M104 S180 T0 (set extruder temperature) (temp updated by printOMatic)
M104 S180 T1 (set extruder temperature) (temp updated by printOMatic)
(**** begin homing ****)
G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
G161 Z F100 (home Z axis minimum)
M132 X Y Z A B (Recall stored home offsets for XYZAB axis)
(**** end homing ****)
G1 X-110.5 Y-72 Z50 F3300.0 (move to waiting position)
G130 X20 Y20 A20 B20 (Lower stepper Vrefs while heating)
M6 T0 (wait for toolhead, and HBP to reach temperature)
M6 T1 (wait for toolhead, and HBP to reach temperature)
G130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)
G0 X-110.5 Y-72 (Position Nozzle)
G0 Z0.6 (Position Height)
G1 E4 F50.0 (Create Anchor)
G92 E0
(**** end of start.gcode ****)
G55
M108 T1(Set tool)
(<layer> 0.528 )
G1 X-20.53 Y-18.09 Z0.53 F4800.0
G1 F1200.0
G1 E1.0
G1 F4800.0
M101
G1 X-20.53 Y18.09 Z0.53 F557.851 E9.222
G1 X-17.6 Y18.09 Z0.53 F557.851 E9.888
G1 X-17.6 Y-18.09 Z0.53 F557.851 E18.11
G1 X-14.67 Y-18.09 Z0.53 F557.851 E18.776
G1 X-14.67 Y18.09 Z0.53 F557.851 E26.998
G1 X-11.73 Y18.09 Z0.53 F557.851 E27.665
G1 X-11.73 Y-18.09 Z0.53 F557.851 E35.886
G1 X-8.8 Y-18.09 Z0.53 F557.851 E36.553
G1 X-8.8 Y18.09 Z0.53 F557.851 E44.774
G1 X-5.87 Y18.09 Z0.53 F557.851 E45.441
G1 X-5.87 Y-18.09 Z0.53 F557.851 E53.662
G1 X-2.93 Y-18.09 Z0.53 F557.851 E54.329
G1 X-2.93 Y18.09 Z0.53 F557.851 E62.551
G1 X0.0 Y18.09 Z0.53 F557.851 E63.217
G1 X0.0 Y-18.09 Z0.53 F557.851 E71.439
G1 X2.93 Y-18.09 Z0.53 F557.851 E72.105
G1 X2.93 Y18.09 Z0.53 F557.851 E80.327
G1 X5.87 Y18.09 Z0.53 F557.851 E80.994
G1 X5.87 Y-18.09 Z0.53 F557.851 E89.215
G1 X8.8 Y-18.09 Z0.53 F557.851 E89.882
G1 X8.8 Y18.09 Z0.53 F557.851 E98.103
G1 X11.73 Y18.09 Z0.53 F557.851 E98.77
G1 X11.73 Y-18.09 Z0.53 F557.851 E106.991
G1 X14.67 Y-18.09 Z0.53 F557.851 E107.658
G1 X14.67 Y18.09 Z0.53 F557.851 E115.88
G1 X17.6 Y18.09 Z0.53 F557.851 E116.546
G1 X17.6 Y-18.09 Z0.53 F557.851 E124.768
G1 X20.53 Y-18.09 Z0.53 F557.851 E125.434
G1 X20.53 Y18.09 Z0.53 F557.851 E133.656
G1 F1200.0
G1 E132.656
G1 F557.851
M103
;M108 S42.0
(*************start toolchange*************)
G54
M108 T0(Set tool)
M18 A B
G1 Z0.53 F3000
G1 X-20.53 Y-3.69 Z0.53 F3000
G1 F4800.0
(*************end toolchange*************)
(<layer> 0.528 )
G1 X-20.53 Y-3.69 Z0.53 F4800.0
G1 F1200.0
G1 E1.0
G1 F4800.0
M101
G1 X-20.53 Y3.69 Z0.53 F557.851 E2.676
G1 X-17.6 Y5.49 Z0.53 F557.851 E3.458
G1 X-17.6 Y-7.29 Z0.53 F557.851 E6.362
G1 F1200.0
G1 E5.362
G1 F557.851
M103
G1 X-14.67 Y-18.09 Z0.53 F4800.0
G1 F1200.0
G1 E6.362
G1 F4800.0
M101
I was stuck with preheat temps.when I turned gcode over ride OFF at the bot under utilities all is well. just a thought...Quote:
Originally Posted by random11
Yes that was it. I forgot to reset defaults when I was installing sailfish so I guess it was some sort of left over of the native firmwareQuote:
Originally Posted by stevekr2