Flashforge extruders heat but do not print

I am very new to 3D printing (got my Flashforge Creator Pro this week). I have leveled the bed (best to my ability), and did the two nozzle test prints (left and right). I had downloaded a BB-8 snowflake from thingieverse (http://www.thingiverse.com/thing:1034193), opened the file in Simplify3D, created the gcode, saved it to the SD card and tried to print. The bed and extruders heat up but no filament comes out. I went back into the settings in Simplify3D and everything seems to be right but I know I have missed something. If anyone could help me out I'd greatly appreciate it.

Upload your x3g file somewhere and post the link here.

I'm thinking they are trying to run the Gcode file and not the x3g file.

Here's a link to the x3g file that I created from the gcode

https://drive.google.com/folderview?...Ws&usp=sharing

I misspoke earlier. I was trying to print from the x3g file not the gcode. I tried printing a different project and everything is working. There's something missing from the code for the BB-8 snowflake and will have to compare.

you can't run g-code from an sd card jfkansas - the printer only 'sees' the x3g file on the card.

It looks like the x3g has a lot of tiny little moves that result in 0 steps of extrusion. I'm assuming you're seeing it move, but just not extruding correct? It puts the big blob on the left side, retracts then goes through a bunch of movement without extruding anything correct? I wonder if there is a way to tell Simplify3D to output longer segments?

I used s3g-decomplier.py from gpx to look at the x3g.