-
4 Attachment(s)
Fabtotum + Taulan nylon
Hello,
Could you please try to identify issues, why my printer is not extruding?
One of two (both were first) great prints: http://3dprintboard.com/attachment.p...tid=5581&stc=1
Printer - Fabtotum
Filament - Taulman Nylon 618
Extrusion temp - tried various, from 200 too 230 (mostly)
Heated bed - 60 + PVZ glass coat
Here are pictures of what happens (meaning, practically nothing, except from mild fumes from hot end) when trying to print Marvin sample file
http://3dprintboard.com/attachment.p...tid=5578&stc=1http://3dprintboard.com/attachment.p...tid=5579&stc=1
Extruder seems a bit black, but no filament seems to have came from it. Also, here is my last "partly sucesfull" print in PLAhttp://3dprintboard.com/attachment.p...tid=5580&stc=1
If you need more info or pictures, please specify
Thanks a lot :)